DFW 'Stang Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
779 Posts
Discussion Starter #1
Arg! The guy that put those in that spot needs to be beaten! Trying to get the one off the drivers side is making me crazy. What size wrench do I need for it? apparently none of the wrenches I have are big enough except one of those adjustable ones but it like to loosen up just enough that Im afraid Im going to round off the nut. And I cant get my hand up there to unclip it either. ARG! how did you guys with aftermarket mids pipes do it? I know the thing cant be too rusted on since they had to have removed the pipe when I had the tranny rebuilt. This was sposed to be easy .... now everything else but the drivers side 02 is off and im stuck.
 

·
RIP
Joined
·
14,035 Posts
get some vice grips if you think the adjustable one is going to round it off
 

·
Registered
Joined
·
779 Posts
Discussion Starter #3
Went to auto zone and got some long handle needle nose pliers to get ahold of the clip and pull it out. Once I got the pipe out from under the car and had some room the adjustable ones finally seated well enough a tap or two with my trusty hammer loosened it enough to take out.
 
1 - 3 of 3 Posts
Top