DFW Mustang Forums banner
1 - 6 of 6 Posts

·
I gots famous friends
Joined
·
8,408 Posts
Discussion Starter · #1 ·
You think I can use my 24's on my 357 motor til I put the forced induction unit?

I think I might see 365 HP out of a low compression 357 with AFR 205 heads and a turbo cam.

That way I don't have to buy the big squirters and mass air til the turbo goes on....
 

·
Worship me
Joined
·
34,275 Posts
You should be OK, you might have to bump the fuel pressure on up there though...like 60 psi or so.

I have made 440 with them on a Vortech car but that was at 90 psi of fp.
 

·
Registered
Joined
·
655 Posts
what does the impedience mean?
 

·
I gots famous friends
Joined
·
8,408 Posts
Discussion Starter · #6 ·
llamastang said:
what does the impedience mean?
Impendance is the electrical resistance that the injector imposes on the overal circuit. The big injectors (above 55 I think) are low impedance, and therefore allow more current to be drawn through the computer that is driving them. You have to have a stand alone unit capable of driving the low impedance injectors, the stock computer can't handle the current load.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top