DFW Mustang Forums banner

1 - 16 of 16 Posts

·
Registered
Joined
·
97 Posts
Discussion Starter #1
Its supposedly a 302 the casting number on the block says,

D10E-6015-AA
1D27

On the rear top of the block right on the edge there is also this number,

1K563949

On the heads it says,

302
B 2 69 DODE

on one on the head is says,

302 B

1E14

Any ideas? thanks for any help i really appreciate it
 

·
Registered
Joined
·
97 Posts
Discussion Starter #3
Anything special about either one of them? would this be a good candidate for a stroker motor? or nitrous? Just wondering
 

·
Registered
Joined
·
154 Posts
supposidly the older blocks have more material in them to prevent cracking where the newer ones do. might be wrong but i believe that to be true.
 

·
Premium Member
Joined
·
843 Posts
heads

Recheck that casting number it should be DOOE. Those used to be the most sought after stock heads. Bigger valves, bigger ports and smaller combustion chambers. Not the best anymore but still a step up from most stock heads.
 

·
Premium Member
Joined
·
5,741 Posts
Hecho en Mexico, lifter valley.
 
1 - 16 of 16 Posts
Top