DFW Mustang Forums banner
1 - 10 of 10 Posts

·
Registered
Joined
·
79 Posts
Discussion Starter · #1 ·
What intake would do the best on my car with stock heads and cam. It's is a 94.
 

·
Registered
Joined
·
655 Posts
stock.......not, i am going to go with the systemax.
 

·
¯\(º_o)/¯
Joined
·
25,199 Posts
I'd say a GT40 intake.
 

·
Out
Joined
·
36,504 Posts
Hogan sheet metal;)

Really, the GT-40 would be good so you won't lose your low-end torque. I would only use it on a mild set up.

With a set of good aftermarket heads and a stout cam, I'd go to the Trick Flow intake.
 

·
Premium Member
Joined
·
15,928 Posts
I got a cobra intake and that netted me 245 to the wheels. Not bad for just a bolt on car with stock heads and cam. That would be the budget way, I like the holley, or the trick flow intakes.

If you look around you can find a good deal, I picked up my cobra for a little over $200, you could do the same.
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top