DFW 'Stang Forums banner

1 - 6 of 6 Posts

·
Registered
Joined
·
85 Posts
Discussion Starter #1
:eek: Ok so here's the deal I recently changed out my intake from stock to cobra and I have heard from a few people that they have had problems with oil being sucked through the pcv vavle and burning off...I am having this problem and was wondering if anyone else has had this problem and if so how could I stop it...I seem to be burning quite a bit of oil cos it's creating a damn vacumm effect and sucking the oil in to the intake and burning it.Any help would be greatly appreciated.Thanks Pete
 

·
Registered
Joined
·
574 Posts
there should be a metal filter below the pcv valve that many people forget to put in when they switch from stock :)
 

·
Registered
Joined
·
85 Posts
Discussion Starter #4
Nope the metal filter is in there and it is still sucking up oil ...any other suggestions?
 

·
The Mexican
Joined
·
2,906 Posts
90GTGuy said:
Nope the metal filter is in there and it is still sucking up oil ...any other suggestions?
yeah....give me your cobra intake, ill give you my stock one + cash...
 

·
Registered
Joined
·
488 Posts
I cut a couple of layers of green brillo pad into round patches and put them in on top of the metal screan....helps keep the oil out a bit
 
1 - 6 of 6 Posts
Top