DFW Mustang Forums banner

5.0 tranny ?

947 Views 7 Replies 4 Participants Last post by  jnobles06
I have a 91 crown vic with a 5.0 motor. My tranny is bad and i need a new one . Does any one know the model tranny that came in the 91 vics ?? Also was wanting to know if the tranny from a 5.0 stang was inner changeable and if so what else would i need besides the tranny. If you could shed some lite on the situation i would appreciate it.
1 - 8 of 8 Posts
its an aod.

INTERCHANGEABLE WITH:
CROWN VICTORIA 92 Police, AOD (PKA model)
LINCOLN & TOWN CAR 91 A.T.
LINCOLN & TOWN CAR 92 A.T.; AOD (PKA model, kick down cable)


found on ebay at this link
http://cgi.ebay.com/ebaymotors/91-9...ptZMotorsQ5fCarQ5fTruckQ5fPartsQ5fAccessories
The Mustang AOD will bolt up but the tailshaft is shorter than the AOD's from the Crown Vic & Lincolns.
if you knew the difference you could have a spacer made or see if someone already makes the size spacer you need. i stuck a fox t-5 in an sn95 and i just had to use the steeda driveshaft spacer.
thanks alot fellas you have already been a hell of a lot more help full than rice killer . com
if you knew the difference you could have a spacer made or see if someone already makes the size spacer you need.
This doesn't sound like a good idea to me....but, to each his own.
This doesn't sound like a good idea to me....but, to each his own.
they make them for the t-5 swaps and i had it behind a 500hp 393 stroker and it never gave me any probs or he could just have the driveshaft lengthened or just get the proper transmission.
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top