Vintage skateboard stuff

Five Oh · 05-17-2002, 03:12 PM

I was wondering if any of you guys have any vintage skateboard stuff, boards, wheels, trucks, and all that Jazz. I know some of you guys skated back in the 80's and early 90's. Thanks for anything..

- Cw.

MattB · 05-18-2002, 03:33 AM

Bring on the Fishtail boards and Indenpendent trucks!

Five Oh · 05-18-2002, 03:53 PM

Lol, Oh yeah.

- Cw.

Lason · 05-19-2002, 12:01 PM

should have said something like 2 months ago, i threw away my original Mike McGill board and about 4 sets of independant trucks, good luck though.

Five Oh · 05-19-2002, 03:33 PM

You actually threw it in the trash?

Why?

- cw.

stangbangr · 05-19-2002, 05:14 PM

i have an old set of rat bones wheels but i wouldn't give em up for the world. i still put them on every once in a while.

Five Oh · 05-19-2002, 11:38 PM

Rat bones were the best, I like G Bones and T Bones.

- Cw.

ScottJ · 05-20-2002, 01:57 AM

Quote:

Originally posted by Five Oh
Rat bones were the best, I like G Bones and T Bones.

- Cw.

On the wide mid 80's style boards, I allways preferred BULLETS!!!! those things were the shit back then. I have about 4 complete's in my parents garage, including a zorlac deck I think. It says metallica on the bottom or somesuch if i remember correctly. Those were cool days, I miss them. Shit I can still remember my realy 1st skateboard. SIMS 'bucksmith' looked like a dollar bill on the bottom. I traded that setup for a G&S deck which was brand new at the time.

Remember when you used to stack all kinds of shit up in your alley to see how high you could ollie over something...I miss those days!

GE · 05-20-2002, 03:27 AM

What are you looking for?

stangbangr · 05-21-2002, 02:08 PM

i still skate as much as possible. we got a concrete park in NW OKC, which is about thirty minutes from where i live. i think my knee is fuct though because i cant stand straight up and down on it.

FlowJack · 05-21-2002, 02:34 PM

I've still got my old New Deal board.

SVTCobra50 · 05-21-2002, 03:01 PM

LOL. I still have my old Steve Caballero deck with indy trucks and bullet 97a wheels. I seldom go a week without at least going down the driveway. Happy days...

Five Oh · 05-22-2002, 04:35 PM

I'm looking for decks to be particular. My brother in law has an old Zorlac with a pushead MetallicA design on the bottom, G & S Trucks, and G - Bones wheels.

- Cw.

Couver · 05-22-2002, 08:38 PM

I have an almost new Hosoi Hammerhead at the house somewhere..Forget what trucks/wheels but the are quality ones if I remember right....I will look when I get off work

STANGGT40 · 05-24-2002, 09:09 AM

i miss those days, i used to love the G&S hollow trucks, no matter how often i broke them, mini rat wheels, and the BBC Decks were it when they came out. ...long noses, concaved board, they were awesome. i used to go to Jeff Phillips skate park and that park near Bachman Lake, behind the Popeyes Chicken, but i mostly just street skated.

Chopped54 · 05-24-2002, 09:44 AM

Check on EBAY, but most people with older skate stuff either hold onto it or are damn proud of it..
I had a few signed Phillps decks that I wish I still had.
Started skating at the Clown & Blue ramps at Bachman Lake in the '80s...
Had quite a few ramps in my back yard growin up...

Five Oh · 05-24-2002, 11:56 PM

My cousin Fabian used to skate those.. We were looking at some old pics, that was a bad ass ramp.

- Cw.

Five Oh · 05-24-2002, 11:57 PM

Couver -

are you interested in a sale?

Couver · 05-25-2002, 01:34 AM

Just emailed you pm me if you didn't get it...

AbecX · 05-26-2002, 04:13 AM

Sweet!!!

92lxstang · 05-26-2002, 01:34 PM

I have a set of Independent Trucks and Splitfire wheels. I just don't know where they are.

Five Oh · 05-26-2002, 02:42 PM

Hey everyone, thanks for all the help and all that jazz, I really appreciate.

- Cw.

96MYSTIC · 05-27-2002, 08:52 AM

I still have the hollow G&S trucks that I still use along with my OJ II's. I wish I still had my Tbones for the ramps though

There is a ton of stuff on ebay. I am going to have to look there again for a new deck. My brother gave me one of his new ones and of course I have to re-drill the holes to make the trucks fit.

I would love to find some of the following boards if anyone knows of any.

Any deck from SMA, Natas????
Any Powell deck of Vallely or Hawk????
H-Street, Danny Way.

mind · 05-28-2002, 03:14 PM

if anyone has a Rodney Mullen deck, i'm looking for one. I just finished building a half pipe in my backyard. It almost a clone of the old Dove ramp in grapevine. maybe we should have a skate/stang party.

96MYSTIC · 05-29-2002, 07:20 AM

How big is the new ramp. I know the Dove ramp sounds so familiar, but I just can't remember.

Let me know when it is time to come skate.

mind · 05-29-2002, 10:29 AM

its 5 feet tall and 16 feet wide. we will probably skate saturday and sunday and paint the decks late sunday. were also gonna be screwing with my tweecer on a single turbo mustang. if anyone wants to hang, PM me and i'll give you my cell and directions.

greenygt · 06-04-2002, 02:57 AM

you guys might freak out, but I have at least 25-or30 of these old school decks still in the original celephane (sp?) wrappers. I also have some complete's with OJII wheels, G&S trucks and all. I even have an original rat bones jacket that still looks new and never been washed. LOL! I am a freak. I also still skate almost every day. I have a bryce knights complete right here in my closet than has never seen concrete.

96MYSTIC · 06-04-2002, 06:23 PM

I'll take the jacket, wheels, trucks, and a couple of the decks please

bad bowtie · 06-05-2002, 12:38 AM

Damn, I never knew this any people on the board skated. I like skateboarding, but I ride BMX street. I ride w/ skateboarders all the time though. We should have a big "thrashin" GTG!

Five Oh · 06-06-2002, 04:44 PM

Where do you bike at, Eisenbergs? Freestyle? or GPX?

- Cw.

STANGGT40 · 06-07-2002, 11:14 PM

Quote:

Originally posted by 96MYSTIC
I still have the hollow G&S trucks that I still use along with my OJ II's. I wish I still had my Tbones for the ramps though

There is a ton of stuff on ebay. I am going to have to look there again for a new deck. My brother gave me one of his new ones and of course I have to re-drill the holes to make the trucks fit.

I would love to find some of the following boards if anyone knows of any.

Any deck from SMA, Natas????
Any Powell deck of Vallely or Hawk????
H-Street, Danny Way.

hey, i used to have that h-street deck. i loved those hollow G&S trucks too, they were awesome. i miss those days.

bad bowtie · 06-13-2002, 11:37 PM

Quote:

Originally posted by Five Oh
Where do you bike at, Eisenbergs? Freestyle? or GPX?

- Cw.

Freestyle and GPX, plus alot of street.

Five Oh · 06-15-2002, 12:14 AM

GPX is the best park I've ever been to, honestly.

- Cw.

bad bowtie · 06-18-2002, 01:05 AM

GPX is sweet. Its kinda exspensive though, plus freestyle is closer to home.

05-17-2002, 03:12 PM	#1
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	Vintage skateboard stuff I was wondering if any of you guys have any vintage skateboard stuff, boards, wheels, trucks, and all that Jazz. I know some of you guys skated back in the 80's and early 90's. Thanks for anything.. - Cw. __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

05-18-2002, 03:53 PM	#3
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	Lol, Oh yeah. - Cw. __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

05-19-2002, 03:33 PM	#5
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	You actually threw it in the trash? Why? - cw. __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

05-19-2002, 11:38 PM	#7
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	Rat bones were the best, I like G Bones and T Bones. - Cw. __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

05-21-2002, 03:01 PM	#12
SVTCobra50 Get it on!! Join Date: Oct 2000 Location: Fort Worth, TX USA Posts: 2,251	LOL. I still have my old Steve Caballero deck with indy trucks and bullet 97a wheels. I seldom go a week without at least going down the driveway. Happy days... __________________ -Dustin '94 Cobra Coast High 408, AFR 205s, 1-3/4" BBK LTs, Tremec TKO, ZA0 Tweecer Self Tune (In progress) '08 F250 King Ranch 4x4 8" of Lift on 38s

05-18-2002, 03:33 AM	#2
MattB [x] original checkboxer Join Date: May 2000 Location: Coppell Posts: 10,682	Bring on the Fishtail boards and Indenpendent trucks!

05-19-2002, 12:01 PM	#4
Lason Snipin' some bitches Join Date: Nov 2001 Location: arlington Posts: 10,767	should have said something like 2 months ago, i threw away my original Mike McGill board and about 4 sets of independant trucks, good luck though.

05-19-2002, 05:14 PM	#6
stangbangr Time Served Join Date: Nov 2001 Location: hiding from you under your girlfriends bed Posts: 185	i have an old set of rat bones wheels but i wouldn't give em up for the world. i still put them on every once in a while.

05-20-2002, 03:27 AM	#9
GE 6 Cliff Trail - Frisco / 1430 Byron Nelson Pkwy Join Date: Sep 2000 Location: Richardson, TX Posts: 30,847	What are you looking for?

05-21-2002, 02:08 PM	#10
stangbangr Time Served Join Date: Nov 2001 Location: hiding from you under your girlfriends bed Posts: 185	i still skate as much as possible. we got a concrete park in NW OKC, which is about thirty minutes from where i live. i think my knee is fuct though because i cant stand straight up and down on it.

05-21-2002, 02:34 PM	#11
FlowJack almost ready to race Join Date: Dec 2001 Location: Denton Posts: 2,916	I've still got my old New Deal board.

05-22-2002, 04:35 PM	#13
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	I'm looking for decks to be particular. My brother in law has an old Zorlac with a pushead MetallicA design on the bottom, G & S Trucks, and G - Bones wheels. - Cw. __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

05-22-2002, 08:38 PM	#14
Couver Time Served Join Date: May 2002 Location: State of Confusion Posts: 763	I have an almost new Hosoi Hammerhead at the house somewhere..Forget what trucks/wheels but the are quality ones if I remember right....I will look when I get off work

05-24-2002, 09:09 AM	#15
STANGGT40 How you doin' Join Date: Mar 2001 Location: 8 Rib > 6 Rib Posts: 27,346	i miss those days, i used to love the G&S hollow trucks, no matter how often i broke them, mini rat wheels, and the BBC Decks were it when they came out. ...long noses, concaved board, they were awesome. i used to go to Jeff Phillips skate park and that park near Bachman Lake, behind the Popeyes Chicken, but i mostly just street skated.

05-24-2002, 09:44 AM	#16
Chopped54 GROWED UP WRONG Join Date: Apr 2001 Location: The Box Babies Come In Posts: 6,491	Check on EBAY, but most people with older skate stuff either hold onto it or are damn proud of it.. I had a few signed Phillps decks that I wish I still had. Started skating at the Clown & Blue ramps at Bachman Lake in the '80s... Had quite a few ramps in my back yard growin up...

05-24-2002, 11:56 PM	#17
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	My cousin Fabian used to skate those.. We were looking at some old pics, that was a bad ass ramp. - Cw. __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

05-24-2002, 11:57 PM	#18
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	Couver - are you interested in a sale? __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

05-25-2002, 01:34 AM	#19
Couver Time Served Join Date: May 2002 Location: State of Confusion Posts: 763	Just emailed you pm me if you didn't get it...

05-26-2002, 04:13 AM	#20
AbecX ¯\(º_o)/¯ Join Date: Nov 2001 Location: Las Colinas Posts: 25,384	Sweet!!! __________________

05-26-2002, 01:34 PM	#21
92lxstang Lifer Join Date: Dec 2001 Location: North Garland Posts: 6,057	I have a set of Independent Trucks and Splitfire wheels. I just don't know where they are.

05-26-2002, 02:42 PM	#22
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	Hey everyone, thanks for all the help and all that jazz, I really appreciate. - Cw. __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

05-27-2002, 08:52 AM	#23
96MYSTIC Television taste funny Join Date: Nov 2000 Location: Aubrey Posts: 3,243	I still have the hollow G&S trucks that I still use along with my OJ II's. I wish I still had my Tbones for the ramps though There is a ton of stuff on ebay. I am going to have to look there again for a new deck. My brother gave me one of his new ones and of course I have to re-drill the holes to make the trucks fit. I would love to find some of the following boards if anyone knows of any. Any deck from SMA, Natas???? Any Powell deck of Vallely or Hawk???? H-Street, Danny Way.

05-28-2002, 03:14 PM	#24
mind oh really? Join Date: Nov 2000 Location: grapevine Posts: 1,489	if anyone has a Rodney Mullen deck, i'm looking for one. I just finished building a half pipe in my backyard. It almost a clone of the old Dove ramp in grapevine. maybe we should have a skate/stang party.

05-29-2002, 07:20 AM	#25
96MYSTIC Television taste funny Join Date: Nov 2000 Location: Aubrey Posts: 3,243	How big is the new ramp. I know the Dove ramp sounds so familiar, but I just can't remember. Let me know when it is time to come skate.

05-29-2002, 10:29 AM	#26
mind oh really? Join Date: Nov 2000 Location: grapevine Posts: 1,489	its 5 feet tall and 16 feet wide. we will probably skate saturday and sunday and paint the decks late sunday. were also gonna be screwing with my tweecer on a single turbo mustang. if anyone wants to hang, PM me and i'll give you my cell and directions.

06-04-2002, 02:57 AM	#27
greenygt Time Served Join Date: Jan 2002 Location: texas Posts: 78	you guys might freak out, but I have at least 25-or30 of these old school decks still in the original celephane (sp?) wrappers. I also have some complete's with OJII wheels, G&S trucks and all. I even have an original rat bones jacket that still looks new and never been washed. LOL! I am a freak. I also still skate almost every day. I have a bryce knights complete right here in my closet than has never seen concrete.

06-04-2002, 06:23 PM	#28
96MYSTIC Television taste funny Join Date: Nov 2000 Location: Aubrey Posts: 3,243	I'll take the jacket, wheels, trucks, and a couple of the decks please

06-05-2002, 12:38 AM	#29
bad bowtie PUNK'S NOT DEAD Join Date: May 2001 Location: Kennedale Tejas Posts: 1,458	Damn, I never knew this any people on the board skated. I like skateboarding, but I ride BMX street. I ride w/ skateboarders all the time though. We should have a big "thrashin" GTG! __________________ -BRANDON- 66' Chevy Stepside SmallBlock 355: SummitRacing Cam, Keith Black pistons, Original crank, Harland Sharp Roller Rockers, Wieand Alum. Intake, Holley 670, Cast-Iron heads, full MSD Ignition, March pulleys, Dynomax Headers, 2 1/2in. Flomaster 1 chambers, Turbo 350 Tranny, 3000 Stall, 12-Bolt-Eaton Posi, Moser Axles, Moroso Studs, 3.73's Maybe some aluminum heads to come in the future!

06-06-2002, 04:44 PM	#30
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	Where do you bike at, Eisenbergs? Freestyle? or GPX? - Cw. __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

06-15-2002, 12:14 AM	#33
Five Oh Time Served Join Date: Jan 2002 Location: Rockwall Posts: 548	GPX is the best park I've ever been to, honestly. - Cw. __________________ - 2004 Chevrolet Colorado - 2003 ZX6R 636

06-18-2002, 01:05 AM	#34
bad bowtie PUNK'S NOT DEAD Join Date: May 2001 Location: Kennedale Tejas Posts: 1,458	GPX is sweet. Its kinda exspensive though, plus freestyle is closer to home. __________________ -BRANDON- 66' Chevy Stepside SmallBlock 355: SummitRacing Cam, Keith Black pistons, Original crank, Harland Sharp Roller Rockers, Wieand Alum. Intake, Holley 670, Cast-Iron heads, full MSD Ignition, March pulleys, Dynomax Headers, 2 1/2in. Flomaster 1 chambers, Turbo 350 Tranny, 3000 Stall, 12-Bolt-Eaton Posi, Moser Axles, Moroso Studs, 3.73's Maybe some aluminum heads to come in the future!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode