PDA

View Full Version : hmmmmmmm by my calculations

Monsoon X
03-31-2003, 07:02 AM
I need a 1.44 60' to run a 6.98 w/ my current setup and weight.


Real numbers: 1.61=7.35, 1.60=7.33, 1.59=7.30

Est: 1.58=7.28-------1.52=7.16----------1.44=6.98

I think it's as simple as 4.10s, finding the correct dial for this suspension and maybe true slicks (not these DOT QTPs)
P.O.S._Dubyuharex
03-31-2003, 07:07 AM
Or you could have all the guys from MOD sit on the back of your when your launching.
Cmarsh93z
03-31-2003, 07:30 AM
What do you weigh in at now?
Monsoon X
03-31-2003, 07:34 AM
Originally posted by Cmarsh93z
What do you weigh in at now?

same. 3390 w/ 1/4 tank of gas
mikeb
03-31-2003, 09:52 AM
Originally posted by Monsoon X

1.44=6.98

true slicks

Rim screws
AnotherRedHead
03-31-2003, 10:04 AM
Calculate the engine speed versus torque multiplication plus cubic inch displacement minus Gross weight times 60 ft divided by trap speed to the third power.

Nick
Monsoon X
03-31-2003, 10:08 AM
Originally posted by AnotherRedHead
Calculate the engine speed versus torque multiplication plus cubic inch displacement minus Gross weight times 60 ft divided by trap speed to the third power.

Nick


Are you high?
AL P
03-31-2003, 10:11 AM
Originally posted by AnotherRedHead
Calculate the engine speed versus torque multiplication plus cubic inch displacement minus Gross weight times 60 ft divided by trap speed to the third power.

Nick

Don't forget to multiply by the .980345 "Leon" factor....remember this is JC we are talking about...
Monsoon X
03-31-2003, 10:16 AM
Originally posted by AL P
Don't forget to multiply by the .980345 "Leon" factor....remember this is JC we are talking about...

Don't make me call you out to Trophy Club's or somewhere bout's, newest attraction.
STROKD
03-31-2003, 10:29 AM
LMAO poor JC...

what 60 foot would a 3,520 lb M5 car that ran a 7.45 @ 101 need to get into the 6s with a 4.99 330' and a 1.79 60'?;) :cool:
AnotherRedHead
03-31-2003, 10:38 AM
DORKD, you are slower than JC, shut up
AnotherRedHead
03-31-2003, 10:40 AM
Originally posted by Monsoon X
Are you high?

Are you black?
STROKD
03-31-2003, 10:56 AM
Originally posted by AnotherRedHead
DORKD, you are slower than JC, shut up

:(

I was just asking sheeshhh... I thought I did pretty good for my first time out granny shifting.:o :(
302_plus_a_few
03-31-2003, 11:37 AM
Originally posted by mikeb
Rim screws JC, Mike is talking about screws that screw the tire to the rim and not what your gay fantansy mind was thinking, mmmmkay? :p
Monsoon X
03-31-2003, 11:45 AM
Originally posted by AnotherRedHead
Are you black?

Maybe not what you think a black should be but, yeah, sure am. ;)
mikeb
03-31-2003, 12:00 PM
Originally posted by 302_plus_a_few
JC, Mike is talking about screws that screw the tire to the rim and not what your gay fantansy mind was thinking, mmmmkay? :p

JC is gay?