TenSecondSnake
12-28-2002, 12:55 AM
I have two amps, the 505 ran the subs and the 405 ran the rest of the speakers. Excellent condition.
$500.00 for both!
V12 Expert Series- 4/3/2-channel models
Alpine MRV-F405 1998-1999 320 watts Rms
(4/3/2 Channel Model)
- RMS Power at 12V, 20 Hz- 20 kHz; 40W x 4 (into 4 ohms, 0.08% THD); 50W x 4 (into 2 ohms, 0.3% THD); Bridged: 100W x 2 (into 4 ohms, 0.3% THD)
- RMS Power at 14.4V, 20 Hz- 20 kHz; 60W x 4 (into 4 ohms, 0.08% THD); 80W x 4 (into 2 ohms, 0.3% THD); Bridged: 160W x 2 (into 4 ohms, 0.3%)
- S/N Ratio: 105 dBA
- Top Panel Adjustment of Crossover and Gain
- Top Panel Power LED
- MOSFET Final Stage
- DC Straight - Discrete Preamp Stage
- Special Preamp Power Supply
- Star Circuit - Noise Elimination Coil
- Input Mode Selector - 4V Staight Input Selector
- Non-Fading PreOut
- Gold Plated Terminals
http://www.rkst.com/mrvf305.jpg
Alpine MRV-F505 1998-1999 400 watts total Rms
4/3/2-Channel Power Amplifier
4V Input Selector
Crossover Adjustment
DC-DC
DC Straight
Discrete Preamp Stage
Duo-B Circuit
Gain Adjustment
Gold Plated Terminals
Independant Crossover
Input Mode Selector
MOS FET
MOS FET Final
Multi Mode
Noise Detection Coil
PWM
STAR Circuit
105 dBA Signal to Noise Ratio
10Hz - 50kHz Frequency Response
$500.00 for both!
V12 Expert Series- 4/3/2-channel models
Alpine MRV-F405 1998-1999 320 watts Rms
(4/3/2 Channel Model)
- RMS Power at 12V, 20 Hz- 20 kHz; 40W x 4 (into 4 ohms, 0.08% THD); 50W x 4 (into 2 ohms, 0.3% THD); Bridged: 100W x 2 (into 4 ohms, 0.3% THD)
- RMS Power at 14.4V, 20 Hz- 20 kHz; 60W x 4 (into 4 ohms, 0.08% THD); 80W x 4 (into 2 ohms, 0.3% THD); Bridged: 160W x 2 (into 4 ohms, 0.3%)
- S/N Ratio: 105 dBA
- Top Panel Adjustment of Crossover and Gain
- Top Panel Power LED
- MOSFET Final Stage
- DC Straight - Discrete Preamp Stage
- Special Preamp Power Supply
- Star Circuit - Noise Elimination Coil
- Input Mode Selector - 4V Staight Input Selector
- Non-Fading PreOut
- Gold Plated Terminals
http://www.rkst.com/mrvf305.jpg
Alpine MRV-F505 1998-1999 400 watts total Rms
4/3/2-Channel Power Amplifier
4V Input Selector
Crossover Adjustment
DC-DC
DC Straight
Discrete Preamp Stage
Duo-B Circuit
Gain Adjustment
Gold Plated Terminals
Independant Crossover
Input Mode Selector
MOS FET
MOS FET Final
Multi Mode
Noise Detection Coil
PWM
STAR Circuit
105 dBA Signal to Noise Ratio
10Hz - 50kHz Frequency Response