L4m3r
08-22-2002, 11:36 PM
Went to denton tonight to work out some bugs and yes there were a few :)
seems as if SPEC sent me a shim that i didnt need for my clutch causing it to stick to the floor if i speed shift... LOL easy fix just have to take the trans out AGAIN and remove the shim......
next thing i had only 10psi in 28x10.50x15 et drags... i put air in them 2 days before and they have the sidewalls bolted to the rim.... so i was bogging pretty hard comming out at 5500rpm
well my best run granny shifting was a
1.63 60ft bogged down to 4,000 rpm
7.5 1/8th
92.8mph
best on old setup with TNT F2 100 shot
1.77
7.66
90 mph or so...
i know i have much more in it.. going to dyno tune it and get a ported TB and some more air in the tires :) BRING ON THE COLD WEATHER AND THE GAS!!!!!:D :D :D
seems as if SPEC sent me a shim that i didnt need for my clutch causing it to stick to the floor if i speed shift... LOL easy fix just have to take the trans out AGAIN and remove the shim......
next thing i had only 10psi in 28x10.50x15 et drags... i put air in them 2 days before and they have the sidewalls bolted to the rim.... so i was bogging pretty hard comming out at 5500rpm
well my best run granny shifting was a
1.63 60ft bogged down to 4,000 rpm
7.5 1/8th
92.8mph
best on old setup with TNT F2 100 shot
1.77
7.66
90 mph or so...
i know i have much more in it.. going to dyno tune it and get a ported TB and some more air in the tires :) BRING ON THE COLD WEATHER AND THE GAS!!!!!:D :D :D