dave, can you help me identify...

[greenbullitt]

what exactly these are? i know they are t3/t04b, what power will they support?
turbonetics
compressor minor dia-58.42
compressor major dia-69.97
turbine minor dia-56.63
turbine major dia-64.84
turbine a/r .62, these are t3 style 5 bolt flange

thanks in advance

[aceman85turbo]

those numbers look a little small for a t04b if i recall.

a 60-1 wheel will have a 7 paired inducer blade set
a T04B have a 8 paired inducer blade set up
and the T04E series which have 6 paired inducer blades.

as for power, I wouldnt know unless there were part numbers to compare. can you take a pic of the front cover and the turbine housing insides?

[greenbullitt]

...

[greenbullitt]

the inlet is 2.75 and the outlet is 2.00, turbonetics said it should be a t04b according to the site, its VERY possible im wrong...

[turbostang]

a 2.75" inlet is a 70MM.

[greenbullitt]

a 2.75" inlet is a 70MM.


just the inlet to the compressor housing is 2.75 though, not the wheel..im a noob at this part. :frown:

[turbostang]

just the inlet to the compressor housing is 2.75 though, not the wheel..im a noob at this part. :frown:

Where did you measure from? The very tip at the tapered part or down by the wheel?

[greenbullitt]

Where did you measure from? The very tip at the tapered part or down by the wheel?



compressor minor dia-58.42
compressor major dia-69.97
turbine minor dia-56.63
turbine major dia-64.84