where to get my dirt bike fixed

[Craizie]

I need to get my KX 125 fixed somewhere in the DFW area. Can anyone recommend a good shop?

[SNEAKY]

whats wrong with it?

[Craizie]

A bunch of things I think, The clutch doesnt disengage when you squeeze the lever, also i think it has some major blow by as you can spin the tire in first and hear the motor compressing.

[TX21]

I work on bikes on the side. Pm me and I will look at it.

[ktm300hater]

a 125 doesnt have much compression anyway, if the bike starts easily then its probably fine on compression. I would change topends on two strokes about every 50 hours of use, any longer than that and you run the risk of a skirt breaking on the piston and possibly chewing up the cylinder...

as far as the clutch not disengaging, more than likely the clutch basket is notched up but you can fix that yourself by removing the basket from the bike and using a file to remove the grooves

[davbrucas]

a 125 doesnt have much compression anyway, if the bike starts easily then its probably fine on compression. I would change topends on two strokes about every 50 hours of use, any longer than that and you run the risk of a skirt breaking on the piston and possibly chewing up the cylinder...

as far as the clutch not disengaging, more than likely the clutch basket is notched up but you can fix that yourself by removing the basket from the bike and using a file to remove the grooves


Or adjusting the damn cable...but it likely needs the plates changed.

[ktm300hater]

ill bet a $100 on the basket, as you know most people that ride 125s bang the living shit out of the clutch lever......you know who I am and know that I am right im not some douchebag that puts in his .02 just to hear himself talk....peace out brucas