New Dyno Nymbers

[foofinator]

765 rwhp, 787 rwtq......

Dyno sheet coming soon. Chris's custom intake picked up 125 rwhp on the same tune with the same dyno conditions.

HPP is the best. :D

[32VfromHell]

Your motor's twin needs boost so i can join in on the fun !

[STROKD]

765 rwhp, 787 rwtq......

Dyno sheet coming soon. Chris's custom intake picked up 125 rwhp on the same tune with the same dyno conditions.

HPP is the best. :D
congrats... why the frown face? :confused:

edit, it made 690 on pump, that would put you over 800 on pump then? :confused:

[JKD]

congrats... why the frown face? :confused:

edit, it made 690 on pump, that would put you over 800 on pump then? :confused:

Nah, he's still got some restrictions. His injectors are maxed out and needs a custom fab'd throttle body.

[SVT Lurch]

Triple digit rwhp is for pussies.

[JKD]

Triple digit rwhp is for pussies.


I've been telling him to hang some twin's on that 3.4 and quit being a pussy about it. :D

[SVT Lurch]

I've been telling him to hang some twin's on that 3.4 and quit being a pussy about it. :D
Then he'll spin past 150. :D

[JKD]

Then he'll spin past 150. :D

Didn't ya hear? He's got some big's n little's coming for the Banana. He'll spin past 150 on front runners! And shit that IRS all over the road. :D

[Justa4banger]

Ehhhh its ok.




:D

[spankustang]

Nice #'s

What mods besides blower/intake upgrade?

[JKD]

Nice #'s

What mods besides blower/intake upgrade?

302 stroker, longtubes etc. Those are damn good numbers for stock heads and cams which are coming soon on his list.

[STROKD]

Nah, he's still got some restrictions. His injectors are maxed out and needs a custom fab'd throttle body.
Still great #s... I just get confused when he talks about this tune and that tune...

Just put the kill tune on it and let her rip! :D

[Cmarsh93z]

congrats... why the frown face? :confused:

edit, it made 690 on pump, that would put you over 800 on pump then? :confused:

With his pump gas pully, it went from like 680 -> 730rwhp. The curve looks a TON better. We were getting belt slip on that pulley because of a lose belt, so we then swapped to a smaller pulley that Foof beat STROKD with, and the gains really showed. 120-150rwhp gains in spots. Foof now needs injectors, clutch, and Gt throttle body :P We need to sell more of these intakes so we can sell all the supporting mods to go along with it !!! ;)

[STROKD]

With his pump gas pully, it went from like 680 -> 730rwhp. The curve looks a TON better. We were getting belt slip on that pulley because of a lose belt, so we then swapped to a smaller pulley that Foof beat STROKD with, and the gains really showed. 120-150rwhp gains in spots. Foof now needs injectors, clutch, and Gt throttle body :P We need to sell more of these intakes so we can sell all the supporting mods to go along with it !!! ;)
What kind of clutch does he have? Manny and I were talking about the twin Ram for my and my dad's car... why doesn't he get one of those?

And Foof could have beat me with the ported blower and stock motor the way he takes off... ;)

[Da Prez]

nice numbers...

[gloomleader]

nice numbers...

fo sho

[Mustangman_2000]

very nice

[98DSM]

Very Nice :) I'm sure you would own me with those kind of #'s, but perhaps we can run once I get my car back.

[Trick Pony]

What kind of clutch does he have? Manny and I were talking about the twin Ram for my and my dad's car... why doesn't he get one of those?

And Foof could have beat me with the ported blower and stock motor the way he takes off... ;)

I've been looking at either the Ram or McLeod twin disc myself. Seems like the way to go if you want to be able to beat the shit out of your clutch, don't want an on/off switch like most really aggressive single discs, and want reasonable pedal effort. $1200 for a clutch is the only downside of course...

[Beenfetchedlately]

Nah, he's still got some restrictions. His injectors are maxed out and needs a custom fab'd throttle body.
Ive got some 96 lbers if he wants to upgrade. 300 bucks. New never run. Used on mockup of fuel rails. Never seen a drop of fuel.

[Andrew]

What kind of clutch does he have? Manny and I were talking about the twin Ram for my and my dad's car... why doesn't he get one of those?

And Foof could have beat me with the ported blower and stock motor the way he takes off... ;)

Come drive my vette next time you're in town. I have a RAM dual street clutch.

[STROKD]

Come drive my vette next time you're in town. I have a RAM dual street clutch.
cool thanks Andrew! I will definitely have to take you up on that... :)

[STROKD]

Very Nice :) I'm sure you would own me with those kind of #'s, but perhaps we can run once I get my car back.
Thats what I like to hear... git him Chris!:D

[FRANCISCO308]

nice #'s foof

[foofinator]

Haha thanks guys..

The flying banana is grounded for a bit!! I'm all out of funds.. the motor was too healthy for my drivetrain.. 15,000 miles on the shortblock and it keeps getting stronger. HPP really knows which stroker kit to pick and they can put together tough cars! Even though the clutch is fucked my BAMF car can still drive, it just stinks a little.

I need:

input shaft fixed
twin disk clutch -- 1400 in parts
injectors -- who knows, I'll ask manny about those 96's!
rear end rebuild (posi is out) -- $$$
Ford GT throttle body + more custom chris stuff! -- :D
10 rib kit -- $$$$$$$$$$$$$$$$$$$$$$
Heads and cams - $$$$ x 10^9


On a teaching assistant salary that will take a couple semesters atleast! But in the meantime I have no problem letting it chill. I do have a TON of shit I could sell.. Anyone know anybody that buys catalytic converters?? I have a few..

The clutch/inputshaft/injectors are first so I can get back on the road to break MORE shit.

[foofinator]

Oh I forgot about the bigs and littles I just spent a bunch of money on!! :(

[ITSSlow]

nice numbers

[STRONGNUFF]

Congrats ! Nice numbers

[STROKD]

Oh I forgot about the bigs and littles I just spent a bunch of money on!! :(
Are you going to race it without the rest of the stuff? If not, send the wheels back and get the drivetrain fixed... stupid to have spent money on wheels for a car you can't drive or race imo... :confused:

[Carrie]

Is Marsh working at HPP?

<--bsharer

[STROKD]

Is Marsh working at HPP?

<--bsharer
yea he built that custom inlet setup that Foof has and another one for the KB 2.8H. Pics of it are on the picture forum...

[32VfromHell]

Haha thanks guys..

The flying banana is grounded for a bit!! I'm all out of funds.. the motor was too healthy for my drivetrain.. 15,000 miles on the shortblock and it keeps getting stronger. HPP really knows which stroker kit to pick and they can put together tough cars! Even though the clutch is fucked my BAMF car can still drive, it just stinks a little.

I need:

input shaft fixed
twin disk clutch -- 1400 in parts
injectors -- who knows, I'll ask manny about those 96's!
rear end rebuild (posi is out) -- $$$
Ford GT throttle body + more custom chris stuff! -- :D
10 rib kit -- $$$$$$$$$$$$$$$$$$$$$$
Heads and cams - $$$$ x 10^9


On a teaching assistant salary that will take a couple semesters atleast! But in the meantime I have no problem letting it chill. I do have a TON of shit I could sell.. Anyone know anybody that buys catalytic converters?? I have a few..

The clutch/inputshaft/injectors are first so I can get back on the road to break MORE shit.


You should put the 3.4 on my car so we can see what it will make with H/C =)

[bsharer]

yea he built that custom inlet setup that Foof has and another one for the KB 2.8H. Pics of it are on the picture forum...

I will have to stop by.

Chris, you work everyday? Time?

[foofinator]

Matt just tried to teach me a lesson about spending money!!

LMAO. :P

[Wade@HPP]

I will have to stop by.

Chris, you work everyday? Time?

Pretty much everyday from 11-6 or so. Saturdays 11-4 :)

[bsharer]

I work in Lewisville. Ill stop by next week during the day.

[Cmarsh93z]

Here is the graph...same pulley, no other changes. 21psi pulley seeing 26 on the top end.

http://www.mustangmods.com/ims/u/143/10669/215985.jpg

Bryan, I will be up there for sure next week..stop by!

Chris

[womack03]

When will they be available for the 2.3 Whipple?

P.S. The inlet on Foofs car is amazingly well done. Awesome work.

[Cmarsh93z]

When will they be available for the 2.3 Whipple?

P.S. The inlet on Foofs car is amazingly well done. Awesome work.

Thanks! Just give Wade a call and schedule a time...we can do another one as soon as we have your stock inlet.

Chris

[STROKD]

Matt just tried to teach me a lesson about spending money!!

LMAO. :P
haha yea I guess I did... just trying to help ya out man... going through the same shit with my toy right now, I still don't have a transmission, fuel pump and a few other needed parts, but I'm not gonna buy that now and then have the other cage and motor stuff done half ass cause I'm out of money... Gotta spend it in succession. ;)

Contrary to popular belief, I don't make a lot of money... I just spend more than I should cause I have no rent right now. :o I'm saving a lot, paying off debt and my Cobra fast so I can afford and qualify for my own house late next year and get married... lot going on all at once.

[JKD]

Contrary to popular belief, I don't make a lot of money... I just spend more than I should cause I have no rent right now. :o I'm saving a lot, paying off debt and my Cobra fast so I can afford and qualify for my own house late next year and get married... lot going on all at once.



No one has every accused you of making alot of money. It's a good thing Daddy does.

[1slocoupe]

No one has every accused you of making alot of money. It's a good thing Daddy does.


LMAO

[CompOrange]

I thought these numbers were supposed to be top secret??? :confused:

[1slocoupe]

I thought these numbers were supposed to be top secret??? :confused:


kinda like your "top secret" wanted ad in the video and pic forums?!?! :rolleyes:

[MotoMan]

765 rwhp, 787 rwtq......

Dyno sheet coming soon. Chris's custom intake picked up 125 rwhp on the same tune with the same dyno conditions.

HPP is the best. :D


Foof I've gotta say hats off to HPP. The intake looks like it came from the dealer stock and looks very very clean for a custom intake. Can't wait to see that beast run.

[STROKD]

No one has every accused you of making alot of money. It's a good thing Daddy does.
Snff, thats a sore subject... lots of bad decisions on my parents side as they should be re-tired now... Pops makes about 1/3 what he was making in the early 90s... (not adjusted for inflation) :(

Oh wells, Imma get my car done soon, that's all that really matters to me. All he's helping with is repair of my iron block rings and bearings and such (which was his idea and he offered). I wish he could help with an AL 454 stroker SBF or somethin like I want to put back in it. Keith is supposed to call me and let me know if my current short block will support the new power once he gets it torn apart and checks for damage. Gots my fingers crossed over here or the poor hatch may be down for a while. :(

Foof, return those wheels and get a clutch so you can do some racin! :D

[Drama_Queen]

Foof I've gotta say hats off to HPP. The intake looks like it came from the dealer stock and looks very very clean for a custom intake. Can't wait to see that beast run.
Congrats on the numbers!! Another satisfied customer!

[Ex President]

Check ur PM's FOOF!