View Full Version : Your last minute friendly reminder - Fall Cruise 2007 - 3 more days!
turbostang
10-18-2007, 10:30 AM
That's right, it's ANOTHER thread about the fall cruise!
Don't forget, It's only 3 days away and I want to see EVERYONE there!
Racers, just a friendly reminder - if you are on "street" tires, drive AROUND the water box.
Don't forget your safety equipment. Helmet,fire jackets, fire pants, long pants, etc...
Most of you know how fast your car is and what safety equipment it needs to have, be sure to have it or you may only make 1 pass. Remember, if you get booted, it's for your own good - it's not personal.
Don't get pissed if you aren't allowed to run because of safety reasons. Also, We race on the track, not through the pits, return road, or anyother surface than the track. (Yes, I am saying that for a reason.)
One more thing, I know there has been a lot of tension in several different threads and threats of ass whoopin's etc.. The track is not the place to fight, ANYONE who fights will be TOSSED OUT AND NOT ALLOWED BACK INTO TXR FOR A CRUISE! NO WARNINGS!
EDIT - Don't forget your cameras. I need tons of pictures - especially funny ones. This will be used for the "Offical Fall Cruise Award goes to:" thread..
1fastvipper
10-18-2007, 10:39 AM
Very Very important!!!!( Racers, just a friendly reminder - if you are on "street" tires, drive AROUND the water box.) :)
whitetrash
10-18-2007, 10:45 AM
gotta work :mad:
but ill try to make it out after
Super Coupe
10-18-2007, 10:57 AM
Was going to make it out but I got called out to ennis, plus I wanna see if I can crack into the 11s.
THE RAT is down, Trans Issues :(
I might come out & watch though :D
One more thing, I know there has been a lot of tension in several different threads and threats of ass whoopin's etc.. The track is not the place to fight, ANYONE who fights will be TOSSED OUT AND NOT ALLOWED BACK INTO TXR FOR A CRUISE! NO WARNINGS!
To test this theory I'm gonna stand next to you ALL DAY with a megaphone saying "Turbo's suck!" ;)
propellerhead
10-18-2007, 11:54 AM
This post will help remind me to bring ear protection for watching launches.
OMEGA DOOM
10-18-2007, 11:58 AM
THE RAT is down, Trans Issues :(
I might come out & watch though :D
somebody better fix your damn trans issues before sunday! :mad:
somebody better fix your damn trans issues before sunday! :mad:
:(
TOMMY
10-18-2007, 01:50 PM
I should be there..no car for me either
OMEGA DOOM
10-18-2007, 02:34 PM
I should be there..no car for me eitherSEB's car is long long over due! :mad:
Juiced4V
10-18-2007, 02:35 PM
somebody better fix your damn trans issues before sunday! :mad:
That is what I was saying.... :(
turbostang
10-18-2007, 02:47 PM
Edit- I added to the original post to remind everyone to bring cameras for the "Offical Fall Cruise Awards" thread after the cruise.. I need PICTURES!
racinreid
10-18-2007, 02:59 PM
This post will help remind me to bring ear protection for watching launches.U will not need it for my Hunk..it has mufflers... :)
racinreid
10-18-2007, 03:01 PM
SEB's car is long long over due! :mad:I'll run ya motor to your uh.motor no wait I forget you went to the dark side you are slow now... :)
OMEGA DOOM
10-18-2007, 03:20 PM
I'll run ya motor to your uh.motor no wait I forget you went to the dark side you are slow now... :) shut yo ass up you old switch hitter! :eek:
DMcRacer
10-18-2007, 03:38 PM
My car is not ready. I will be there in my sons old beat up LT1 Formula :o
TOMMY
10-18-2007, 06:01 PM
SEB's car is long long over due! :mad:
My car isn't hurt it just hasn't got any faster :( . I ran a 6.xx on motor and thats all I wanted to do for now. The Jug is coming real soon..I promise you that :D
mikeb
10-18-2007, 06:11 PM
U will not need it for my Hunk..it has mufflers... :)
He'll need them; I'll be running open headers :D
mustang87
10-18-2007, 07:40 PM
bringing my heap
turboten5
10-18-2007, 08:32 PM
Are they still calling for rain on sunday?
mikeb
10-18-2007, 08:44 PM
Are they still calling for rain on sunday?
late in the day; hopefully after we are done
turboten5
10-18-2007, 08:47 PM
i checked tonight and its not in the forecast anymore
FX331
10-18-2007, 08:48 PM
Well, I thought I was going to make it. While hot lashing the rockers tonight I cracked a poly lock..... It was the LAST ONE I did, go figure!!! Hopefully I can at least one tomorrow, would preffer a set of girdles with locks. Going to check with Dallas Mustang in the morning.
Does anyone have or know of a shop near Wylie that might have 7/16 locks or a set of girdles??? (AFR 205 Heads)
HELP, I really want to goe this POS ont at least once this year!!
mikeb
10-18-2007, 09:31 PM
Well, I thought I was going to make it. While hot lashing the rockers tonight I cracked a poly lock..... It was the LAST ONE I did, go figure!!! Hopefully I can at least one tomorrow, would preffer a set of girdles with locks. Going to check with Dallas Mustang in the morning.
Does anyone have or know of a shop near Wylie that might have 7/16 locks or a set of girdles??? (AFR 205 Heads)
HELP, I really want to goe this POS ont at least once this year!!
is ET automotive in garland still open? They would probably have one.
FX331
10-18-2007, 09:37 PM
is ET automotive in garland still open? They would probably have one.
I forgot about them..... I'm still new here, to Texas that is.
Thanks for the heads up! I'll call them in the morning!
Geronimo
10-18-2007, 09:40 PM
Well, I thought I was going to make it. While hot lashing the rockers tonight I cracked a poly lock..... It was the LAST ONE I did, go figure!!! Hopefully I can at least one tomorrow, would preffer a set of girdles with locks. Going to check with Dallas Mustang in the morning.
Does anyone have or know of a shop near Wylie that might have 7/16 locks or a set of girdles??? (AFR 205 Heads)
HELP, I really want to goe this POS ont at least once this year!!
Try Keith Craft in Plano, they might.
Futurama
10-18-2007, 09:43 PM
cant wait. i will be sure to bring my for sale sign.
BigShoe
10-18-2007, 10:02 PM
Well, I thought I was going to make it. While hot lashing the rockers tonight I cracked a poly lock..... It was the LAST ONE I did, go figure!!! Hopefully I can at least one tomorrow, would preffer a set of girdles with locks. Going to check with Dallas Mustang in the morning.
Does anyone have or know of a shop near Wylie that might have 7/16 locks or a set of girdles??? (AFR 205 Heads)
HELP, I really want to goe this POS ont at least once this year!!
If you cant find any pm me i have a bunch of extra ones you can have to get you by.
slim87GT
10-18-2007, 10:09 PM
I wont be there. This time its because my damn truck is broke :mad:
FX331
10-18-2007, 10:12 PM
If you cant find any pm me i have a bunch of extra ones you can have to get you by.
Thanks!! If I cant find something I'll get ahold of you tomorrow afternoon & figure out how to get them from you.
airbrush
10-18-2007, 11:06 PM
hope we don't get any rain we don't need any...im there with my camera :D :p hope to see alot of you there!!!
I'm new to Texas,were is this cruise?I'd like to come out and watch
I'm new to Texas,were is this cruise?I'd like to come out and watch
Check out the sticky thread at the top of the forum.
Where is that?I'm in Duncanville
Where is that?I'm in Duncanville
*sigh*
It's in Ennis this Saturday. Starts at 8pm. $5 bucks to race.
downshift_me
10-19-2007, 01:34 AM
*sigh*
It's in Ennis this Saturday. Starts at 8pm. $5 bucks to race.
LOL. :D
Where is that?I'm in Duncanville
Texas Raceway, Kennedale
Sunday October 21, 2007
Gates Open 9:30 - 4:00
Admission 10$ Race or watch.
Be sure to bring a helmet; they're a mean bunch!
turbostang
10-19-2007, 11:21 AM
TTT...
I can't wait...
I want to see EVERYONE there!
-Brooks
silvereight
10-19-2007, 02:44 PM
Got some new tires today so I am in!
*sigh*
It's in Ennis this Saturday. Starts at 8pm. $5 bucks to race.
I'm not familiar with the area,sorry for asking a fuckin question.
Streetdemon70
10-19-2007, 03:51 PM
I'm not familiar with the area,sorry for asking a fuckin question.
lol newbies :rolleyes: might want to check around before you go posting like that at certain people on this board.
FX331
10-20-2007, 06:29 PM
Well, I thought I was going to make it. While hot lashing the rockers tonight I cracked a poly lock..... It was the LAST ONE I did, go figure!!! Hopefully I can at least one tomorrow, would preffer a set of girdles with locks. Going to check with Dallas Mustang in the morning.
Does anyone have or know of a shop near Wylie that might have 7/16 locks or a set of girdles??? (AFR 205 Heads)
HELP, I really want to goe this POS ont at least once this year!!
Cars fixed, Keith Craft had a set. I'll be there with the fam in tow... Anyone else bringing their kids?? I'll have my 4 (7,5,3 & 1) along with my wife. Were looking forward to meeting some people as we are new to Texas!! Come introduce yourselves, cant wait to meet everyone. I'll be in a silver Dodge with this on the back.... http://motorcitynationals.com/v-web/gallery/album177/DOC5363
See ya there!
vBulletin® v3.8.1, Copyright ©2000-2009, Jelsoft Enterprises Ltd.