PDA

View Full Version : Incoming more parts!

AbecX
10-15-2007, 07:56 AM
Getting me some velocity stacks and a y pipe. I cant think of anything else small to get for my bike before I get it tuned with this PCIII, any ideas? r1-forums is to massive of a site, they expect everyone to know the lingo :(

ps. the only thing done so far mod wise is the baffles taken out.
[CS]ls1haha
10-15-2007, 08:02 AM
smog plates.. You have new cans already? Filter?

http://www.gravesport.com/cgi-bin/shopper?preadd=action&key=AB__011
AbecX
10-15-2007, 08:05 AM
ls1haha']smog plates.. You have new cans already? Filter?
I have stock mufflers, I hate the way every after market ones look like, I've yet to find any that are 'stealth' enough for my liking, the stock ones like so clean to me, I've been through 4 different muffler threats on r1-forums trying to find something I like :(
[CS]ls1haha
10-15-2007, 08:11 AM
I have stock mufflers, I hate the way every after market ones look like, I've yet to find any that are 'stealth' enough for my liking, the stock ones like so clean to me, I've been through 4 different muffler threats on r1-forums trying to find something I like :(

http://www.aandrmotorsport.com/index.php?target=products&product_id=3

These sound pretty wicked, and out of stock cans. Does it have these or are they just removed???
thumpin347
10-15-2007, 05:17 PM
Get an Akrapovic full system. As far as velocity stacks...say hello to money down the drain.
stunter bob
10-15-2007, 05:23 PM
need anything done in carbon fiber? my buddy has a little shop and can make some kickass carbon fiber parts
AbecX
10-15-2007, 05:39 PM
No, but i want to get my rear sets powder coated black as well as my levers.
AbecX
10-15-2007, 05:44 PM
by the way, does anyone know where I can get a couple of dyno runs in for a baseline cheap?
evil jose
10-15-2007, 06:07 PM
by the way, does anyone know where I can get a couple of dyno runs in for a baseline cheap?

AnotherRedHead has a shop in between Cedar Hill and Midolothian heading down 67 and he has a dyno. Maybe we can convince him to do a dyno day. I'd like to get mine base lined and maybe adjusted a little for adding a K&N.

BTW, I can't believe you like the look of the stock cans :p
Neiladin
10-15-2007, 07:54 PM
http://cgi.ebay.com/ebaymotors/2004-06-Yamaha-R1-GYTR-CARBON-FIBER-EXHAUST-OEM-SLIP-ON_W0QQcmdZViewItemQQcategoryZ35596QQihZ014QQitemZ 330166405245QQrefidZstore

i absolutely love this exhaust, craizie has them on his raven r1 and they look and sound fan-fucking-tastic.
BottleRocket
10-15-2007, 09:43 PM
You wanna just go fast or make it perform better? Those cans are kinda thrown together, but they sound decent. You shouldnt need a Y-pipe, just gut the cat, dont waste the money, that piece is already Ti. Velocity stacks paired with a BMC filter actually do some good. PC III will make the biggest difference IMO
ThreeFingerPete
10-15-2007, 09:47 PM
Weight reduction.
BlueLT1SS
10-15-2007, 10:10 PM
all carbon fiber body work
[CS]ls1haha
10-15-2007, 10:46 PM
all carbon fiber body work

say what?

http://www.oppracing.com/bodywork.php?id=45#103

$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
Super Coupe
10-16-2007, 01:10 AM
Spend the money on riding lessons. That will make the biggest difference.
AbecX
10-16-2007, 07:43 AM
You wanna just go fast or make it perform better? Those cans are kinda thrown together, but they sound decent. You shouldnt need a Y-pipe, just gut the cat, dont waste the money, that piece is already Ti. Velocity stacks paired with a BMC filter actually do some good. PC III will make the biggest difference IMO
The ypipe is only $149 or less. I'd rather have a new solid piece then gutting out and rewelding the current ypipe. Plus I can get these ceramic coated black before i install them. Do you think i should get the A&R Baffle kit, I haven't looked at the cans yet.
BottleRocket
10-16-2007, 02:57 PM
The ypipe is only $149 or less. I'd rather have a new solid piece then gutting out and rewelding the current ypipe. Plus I can get these ceramic coated black before i install them. Do you think i should get the A&R Baffle kit, I haven't looked at the cans yet.

The cans on now have the same baffles, just made by D&D, but they arent nearly as loud as a regular D&D pipe. You dont have to cut and re-weld the Y-pipe, it takes a long screwdriver and a hammer to punch out the core, there is a how-to on R1-forum. Its not nearly as much trouble as you may think, I just didnt feel like dropping the coin on a PCIII to fix the map.
Hell-Bent SS 2
10-16-2007, 04:51 PM
You could always gear it a little different,it all depends on what you are trying to do with it..BTW pm me your phone # so I can call you when we go ride...Chad
AbecX
10-17-2007, 02:46 PM
I did some more searching, i'm going to get the TiForce full exhaust system, they have cone ends for the cans that make them look very much like stock. Defiantly going to get a base line dyno then with the small mods. As far as what I want out of this bike, I just want it to look nice and to go fast. I'm not interested in track riding ( straight line ), but would eventually like to hit a road course. I mainly just want to have fun while I'm on it, I hope its not too loud after the install.

http://img.photobucket.com/albums/v706/goobr/2006/R1%20TiForce%20Install/TiForce1.jpg
88hatch5_0
10-17-2007, 03:39 PM
was gonna say, don't go with the GYTR pipes. they delaminate easily. then you haveto get the clear coat redone on them or they look like ass.
jammeejamm
10-17-2007, 03:44 PM
i put tiforce on my k6 for the same reasons. decent price and decent gains. the sound was perfect. not too loud, not too quiet.
AbecX
10-17-2007, 05:23 PM
$800 for a full system new :O

http://www.orientexpress.com/images/catalog/OERExhaustCloseout2007.jpg
ThreeFingerPete
10-17-2007, 05:32 PM
$800 for a full system new :O

http://www.orientexpress.com/images/catalog/OERExhaustCloseout2007.jpg

That's a steal!
AbecX
10-17-2007, 05:36 PM
$824.85 Shipped, fucking getting some good deals lately!
Stephen
10-18-2007, 04:23 AM
AnotherRedHead has a shop in between Cedar Hill and Midolothian heading down 67 and he has a dyno. Maybe we can convince him to do a dyno day. I'd like to get mine base lined and maybe adjusted a little for adding a K&N.

BTW, I can't believe you like the look of the stock cans :p
cruz... go see sabin performance
214-351-4555 i always trusted them with all my bikes!! hell i wouldnt let anyone touch my bike except for jim and don
HobieF3
10-18-2007, 12:45 PM
cruz... go see sabin performance
214-351-4555 i always trusted them with all my bikes!! hell i wouldnt let anyone touch my bike except for jim and don

Damn, haven't heard that name in a while. They still located over by the Ta-Ta bars off 35?
HobieF3
10-18-2007, 12:50 PM
I did some more searching, i'm going to get the TiForce full exhaust system

would eventually like to hit a road course. I mainly just want to have fun while I'm on it



Good, less than full exhaust is a waste, especially if you are going to get/need a power commander and get it tuned.


http://www.lstd.com/

http://ridesmart.info/

Spend money on a track day before you blow any more cash on mods.
HobieF3
10-18-2007, 12:59 PM
Ridesmart used to be about $50 cheaper depending on the track/day, but that could have changed.
GARS04
10-18-2007, 02:03 PM
AnotherRedHead has a shop in between Cedar Hill and Midolothian heading down 67 and he has a dyno. Maybe we can convince him to do a dyno day. I'd like to get mine base lined and maybe adjusted a little for adding a K&N.

BTW, I can't believe you like the look of the stock cans :p

That bike did 103 on two different Dyno's all stock and 107 after the Power Commander and Slip on. I know I still have the graph someplace.
AbecX
10-18-2007, 02:41 PM
Good, less than full exhaust is a waste, especially if you are going to get/need a power commander and get it tuned.


http://www.lstd.com/

http://ridesmart.info/

Spend money on a track day before you blow any more cash on mods.
holy shit that looks like fun.
BottleRocket
10-18-2007, 04:37 PM
holy shit that looks like fun.

thats because it is. get the lap timer
Stephen
10-19-2007, 04:17 AM
Damn, haven't heard that name in a while. They still located over by the Ta-Ta bars off 35?
which name jim or don??

as far as i know they are still of shady shore trail near the "wild turkey"
HobieF3
10-19-2007, 07:51 AM
which name jim or don??

as far as i know they are still of shady shore trail near the "wild turkey"

Jim
AbecX
10-19-2007, 03:35 PM
thats because it is. get the lap timer
Link please.
BottleRocket
10-19-2007, 07:04 PM
Link please.

http://ridesmart.info/mm5/merchant.mvc?Screen=CTGY&Store_Code=R&Category_Code=110507R

I'd say enter in level 2, you can always switch up or down depending on your comfort level out there. lap timer is $15 extra, but w/o it there is no way to know if youre doing better or not
89stangGT
10-19-2007, 08:46 PM
http://ridesmart.info/mm5/merchant.mvc?Screen=CTGY&Store_Code=R&Category_Code=110507R

I'd say enter in level 2, you can always switch up or down depending on your comfort level out there. lap timer is $15 extra, but w/o it there is no way to know if youre doing better or not

zx-6r and 10r come with a built in lap timer. :cool:
PWTRTXSS
10-19-2007, 08:57 PM
Get the E-mail filter. It stops spam from slamming your ecu.
BottleRocket
10-20-2007, 12:28 AM
zx-6r and 10r come with a built in lap timer. :cool:

so does the LE R1. do you have any idea how those lap timers work built in? you have to time yourself. at the start of a lap you gotta hit the starter switch and each lap you gotta hit the switch again to make a split. very inaccurate. these lap timers are transponders that give lap and split times.