Anyone got a chain maker?

[frsslt1]

Need to break this 520 chain and re-make it with a new master link. I am going to shorten the bike back to stock now...

Anyone want to help me out? I can even bring a stand to where your at, and do it all in your drive way if you'd like!

[stunter bob]

all you need to do is use a dremel to cut the links apart and take out how ever many you need..then buy a clip link and just clip it back together...rivet links suck cause once its on..the chain cant come off unless you cut it
and i run clip links and ive never had one come apart on me..and ive got a pretty long chain

[the spindoctor]

clips aren't bad, just make sure its turned the right way and put some silicone on it to keep it from vibrating off.

[ThreeFingerPete]

Just use your massive arms to tear the chain apart, and then re-assemble with a master link.

[HobieF3]

clips aren't bad, just make sure its turned the right way and put some silicone on it to keep it from vibrating off.

I prefer to rivet them for piece of mind, but I had a siliconed master link on my F3 back in the day with no problems for atleast 15K miles or so.

[frsslt1]

who's got clip links for an EK 520 chain in stock??

thanks!

[fordracing19]

I dunno what happened to my chain tool.

[lethal injection]

all you need to do is use a dremel to cut the links apart and take out how ever many you need..then buy a clip link and just clip it back together...rivet links suck cause once its on..the chain cant come off unless you cut it
and i run clip links and ive never had one come apart on me..and ive got a pretty long chain

X2

[stunter bob]

who's got clip links for an EK 520 chain in stock??

thanks!
try bates cycles or nortex cycles

[FastFord19]

I dunno what happened to my chain tool.


I got it pretty sure.