Racing Retard QOTD!!!

[Mach1Marauder]

LOL, Screw it I'm going to make a pass with it anyway.. Hell it should still run some high 6's with #7 & 8 leaking down.. I'll find out, It is going to been to be rebuilt anyway so what difference does it make..

Coming from someone that ran 8.2x N/A Sunday shooting a quart of oil out the the cam cover! :rolleyes: :rolleyes:

Huffin' is BAAAAAAAAAD! :p

[turboten5]

Stick you a pushrod motor in there and learn what real power is..LOL

[turbostang]

Stick you a pushrod motor in there and learn what real power is..LOL


I wonder if the new mod motor drag radial record holder says the same thing.. he only ran a 7.9x@170 something MPH. :confused:

edit - here's the post..

Someone went 7's on a drag radial with a mod motor...pretty impressive.

cut and paste from the thread on turbomustangs

Worlds First 7 Second Mod Motor on Drag Radials

7.98 @ 175.96-M/T Radials
4.6L(284ci) Mod Motor
GT47-85mm

Today out at Memphis Motorsports Park at the NMCA (S/S) race we busted off the first 7 second run for a Mod Motor Drag Radial Car

7.98 @ 175.96

Had the wrong gears in it.

Went 5.21 @ 142 at the eighth.

4.6L DOHC (284 ci)
Stock Suspension
True 88mm Turbo (Precision GT47-88)

Prollie old news but i just saw it so sorry if it's a repost.

[dan03mach]

Coming from someone that ran 8.2x N/A Sunday shooting a quart of oil out the the cam cover! :rolleyes: :rolleyes:

Huffin' is BAAAAAAAAAD! :p
It makes alot of difference when you wipe all the oil out of the MAF so it will read right.. Why are you worried about me so much my car is still running and driving?? It has a couple pistons that are leaking down, So what.. It still runs and drives just fine.. I'm going to rebuild it soon so I'm going to spray it to see what it does.. Hell I'll make an N/A pass too just to show you the difference between a oilly MAF and Clean one.. The car is still running very strong on Motor, haven't sprayed it yet to see how it runs on bottle.. I'll do that later and take a video..

Blowing your motor apart at the track is bad too so whats your point???

[Mach1Marauder]

It makes alot of difference when you wipe all the oil out of the MAF so it will read right.. Why are you worried about me so much my car is still running and driving?? It has a couple pistons that are leaking down, So what.. It still runs and drives just fine.. I'm going to rebuild it soon so I'm going to spray it to see what it does.. Hell I'll make an N/A pass too just to show you the difference between a oilly MAF and Clean one.. The car is still running very strong on Motor, haven't sprayed it yet to see how it runs on bottle.. I'll do that later and take a video..

Blowing your motor apart at the track is bad too so whats your point???
Hey dingles...........the INTAKE is blown............nothing else..........longblock is intact.

[dan03mach]

Hey dingles...........the INTAKE is blown............nothing else..........longblock is intact.
Well bring it out Thursday night then I'll be out there.. My motor is intact and running..

[mutherjuggz]

Well bring it out Thursday night then I'll be out there.. My motor is intact and running..



It's not Bill that's scared, it's Lousie! :eek:

[Mach1Marauder]

Well bring it out Thursday night then I'll be out there.. My motor is intact and running..
I'm starting the turbo project! :cool:

[Mach1Marauder]

It's not Bill that's scared, it's Lousie! :eek:
You need a spankin'? :confused: :D

[dan03mach]

I'm starting the turbo project! :cool:
Yep.. Just the same, expect I'm going the blower rout.. Thats going to be my Winter project....

[Mach1Marauder]

Yep.. Just the same, expect I'm going the blower rout.. Thats going to be my Winter project....
You need to have your boy set ya up with a big single turbo and stay away from belts. :p

[dan03mach]

You need to have your boy set ya up with a big single turbo and stay away from belts. :p
Instant power from a blower, Don't have to worry about boost lag.. An F1R should make plenty of power for what I want..

[90GT50]

Instant power from a blower, Don't have to worry about boost lag.. An F1R should make plenty of power for what I want..You wouldn't have to worry about much lag if you got the right turbo with the right A/R.

[dan03mach]

You wouldn't have to worry about much lag if you got the right turbo with the right A/R.
A big single will lag.. Hell Twins will lag some..

[TOMMY]

Bill & Dan = Hatfields & the McCoys......Feuding....LMAO!
good luck to both of you guys in your new projects! I'm still a newbie so I will try the cam/spray for awhile.

[Mach1Marauder]

Bill & Dan = Hatfields & the McCoys......Feuding....LMAO!
good luck to both of you guys in your new projects! I'm still a newbie so I will try the cam/spray for awhile.
pussy! :p

[momo stallion]

It makes alot of difference when you wipe all the oil out of the MAF so it will read right.. Why are you worried about me so much my car is still running and driving?? It has a couple pistons that are leaking down, So what.. It still runs and drives just fine.. I'm going to rebuild it soon so I'm going to spray it to see what it does.. Hell I'll make an N/A pass too just to show you the difference between a oilly MAF and Clean one.. The car is still running very strong on Motor, haven't sprayed it yet to see how it runs on bottle.. I'll do that later and take a video..

Blowing your motor apart at the track is bad too so whats your point???


i might be thinking of the wrong person, but didnt you just have that motor built?

[TOMMY]

pussy! :p



lol....you had your seat time with spray. let me get mine :p

[dan03mach]

i might be thinking of the wrong person, but didnt you just have that motor built?
Yeap, and I sprayed too much N20 thought it and it went lean and messed up #7 & 8.. They are leaking down.. #8 is the bad one though, the spark plug was toasted, the tip was melted back.. #7 just had a little oil around the threads of the plug. Both still have compression, but it isn't full compression, but the car still runs and drives fine..

[momo stallion]

Yeap, and I sprayed too much N20 thought it and it went lean and messed up #7 & 8.. They are leaking down.. #8 is the bad one though, the spark plug was toasted, the tip was melted back.. #7 just had a little oil around the threads of the plug. Both still have compression, but it isn't full compression, but the car still runs and drives fine..


that blows. did you not tune it for that much nitrous?

[Mach1Marauder]

that blows. did you not tune it for that much nitrous?
nope

[dan03mach]

that blows. did you not tune it for that much nitrous?
It was ok on the 200 shot that put down 530rwhp @ 570rwtq, but I upped the shot racing a Viper to a 250 and I think my fuel system was pretty much maxed out so it went lean and damaged it.. Looking at # 8 spark plug you could tell, the tip was melted back.. Not pretty looking, but hey Smokey is still running though :D I am still driving it all over the place..

[Car-less Chris]

on a 200 shot i would expect more than those #'s bro..whats wrong with it..what does it do on the motor?

[Beenfetchedlately]

Instant power from a blower, Don't have to worry about boost lag.. An F1R should make plenty of power for what I want..When you cant spin that blower let me know..I need one for a car. :cool:

[Beenfetchedlately]

i might be thinking of the wrong person, but didnt you just have that motor built?
yep!!! LMFAO! And he was swinging on the nuts like Tarzan in a tree! :cool:

[momo stallion]

It was ok on the 200 shot that put down 530rwhp @ 570rwtq, but I upped the shot racing a Viper to a 250 and I think my fuel system was pretty much maxed out so it went lean and damaged it.. Looking at # 8 spark plug you could tell, the tip was melted back.. Not pretty looking, but hey Smokey is still running though :D I am still driving it all over the place..

ah, ok. sucks that the motor has to come right back out, but it probably was cause of fuel.

at least your 250 shot almost holding makes me feel better about what im about to spray.

[dan03mach]

on a 200 shot i would expect more than those #'s bro..whats wrong with it..what does it do on the motor?
LMAO.. Hell on the stock motor the 150 shot only put down 435rwhp & 515rwtq.. With the new motor and new nitrous system. It put down 481rwhp & 545rwtq with the same 150 pills that the old set up did.. The 200 pills gave me an extra 220rwhp.. The motor N/A put down 310rwhp & 337rwtq on the stock computer tune.. So tell me how is an extra 220rwhp low for 200 pills.. Sounds like some good ole shit talking to me.

[Car-less Chris]

you only put down an additional 25 trq with a extra 50 of the sauce..sounds like your kit is weak..but to each there own..i know what bills car did through a auto with less nitrous and etc..trust me you didnt want none!

[dan03mach]

When you cant spin that blower let me know..I need one for a car. :cool:
It will spin it.. ;)

[dan03mach]

you only put down an additional 25 trq with a extra 50 of the sauce..sounds like your kit is weak..but to each there own..i know what bills car did through a auto with less nitrous and etc..trust me you didnt want none!
Well no shit he has a verter and it flashes, they can make more power on the dyno.. Damn Chris I thought you were smarter then that... I also saw what happend to Bills car too.. But you didn't see him make any new best passes did you.. 7.0's with all that extra work.. LMAO.. He was talking about 6.7's yeah right.. I don't know where you got your math from but I put down a 100 more rwhp then my old set up with just 50 more on the pill.. Hell I made 50 more with the same pills as the old set up just like Bills old set up.. My new N20 set up flows a hell alot more then the old one.. It is alot better set up.. Chris you wouldn't know since you didn't see my set up.. I didn't want none LMFAO.. Yeah sure Chris if you say so.. He had the 175 pills in it, More N20, supposily a better tune and to only run the same as he was all week.. So he put the 175 pills in instead of the 150 pills and all of the sudden it is going to run 3 tenths faster.. OK if you say so..

[JMAC]

Hey dingles...........the INTAKE is blown............nothing else..........longblock is intact.Are you sure nothing fell down into the motor? If you had it tuned for a certain shot why did you pill up?

[Car-less Chris]

i would expect more trq..look i said torque not hp..anyways good luck with the motor build..

[dan03mach]

i would expect more trq..look i said torque not hp..anyways good luck with the motor build..
It had plenty of tq, but it was very fat on the hit so the intial TQ was a little lower then having it leaner on the hit.. You should know that Chris...

[dan03mach]

Are you sure nothing fell down into the motor? If you had it tuned for a certain shot why did you pill up?
Nothing fell down in the motor... I don't know why I pilled it up, I guess I just wanted to make the most power I could while racing that Viper I ran..

[JMAC]

I was directing that to Bill. :D

[Car-less Chris]

bills was tuned on the dyno..he didnt pill it up..he got a bad solinoid of some sort..

[dan03mach]

I was directing that to Bill. :D
Well it worked for me too.. LOL He pilled it up and changed all of his stuff to try to hang with my car since I put a new shortblock in and a different N20 system that made alot more power then my old set.. The old set up ran a 7.100 with stock front suspension.. Well I put all new drag suspenion on the car, took 100 more lbs out of it then I use to have, and I was making 100 more rwhp then before.. I guess he got a little Skurred.. :eek:

[dan03mach]

bills was tuned on the dyno..he didnt pill it up..he got a bad solinoid of some sort..
OK Chris I saw the pills his old ones were a 63 & 37 the ones he had in it were 70 & 43.. You might be able to B.S. some people but not all I even pointed that out to him.. LOL His old set up, those solenoids were maxed out at a 150 shot, that is why he put the NX Lightning Carbon Fiber .093 Orfice, because they flow up to a 300 shot, and he needed bigger noids to run the bigger shot.. ;)

[Car-less Chris]

sorry let me refraise that..he pilled it up on the dyno but not at the cruise..he was tuned and ready to go..he's old noids are good for 200..

[dan03mach]

sorry let me refraise that..he pilled it up on the dyno but not at the cruise..he was tuned and ready to go..
It was pilled the same after he blew the intake off the car.. He had the 70 N20 and 43 Fuel pill in.. That is when I looked at his pills and said something too him about it.. The 150 shot is suppost to be a 63 & 43 pill with that kit, so he had a bigger N20 pill and not a bigger Fuel pill. But I don't know what they tune looked like.. You should post the graft with the A/F :D He should have had the NX shark nozzle with the NX pills..

[JMAC]

Damn you 4v guys use alot of N2o! :eek:

[dan03mach]

sorry let me refraise that..he pilled it up on the dyno but not at the cruise..he was tuned and ready to go..he's old noids are good for 200..
Damn Chris what are you smoking??? I had the exact same noids and tested them on the dyno.. The max they would flow was a 150 shot.. Nothing else.. I even tried to put a 200 pill in mine at SQR on there dyno testing that system out.. The only thing it did was run fat as hell because their was no more N20 being flowed through the solenoids.. Those small Solenoids will not flow a 200 shot, they flow 150 max.. ;)

[Car-less Chris]

i dunno about your luck but i know a certain someone who has pushed them with a 200..they didnt make the full 200 but they did it..

[Juiced4V]

Damn you 4v guys use alot of N2o! :eek:


yep ;)

[Beenfetchedlately]

Damn Chris what are you smoking??? I had the exact same noids and tested them on the dyno.. The max they would flow was a 150 shot.. Nothing else.. I even tried to put a 200 pill in mine at SQR on there dyno testing that system out.. The only thing it did was run fat as hell because their was no more N20 being flowed through the solenoids.. Those small Solenoids will not flow a 200 shot, they are rated at 150 max.. ;)

What size orfice is in question here?

And if they didnt make a complete 200 then they didnt flow 200....But if you want to measure at the crank...sure they made it there...Im assuming you tried to get these noids to flow that much power to the wheels though.

[Car-less Chris]

Flows Up to 200 hp; .078 orifice; 1/8" inlet; 1/8" outlet.

[dan03mach]

What size orfice is in question here?

And if they didnt make a complete 200 then they didnt flow 200....But if you want to measure at the crank...sure they made it there...Im assuming you tried to get these noids to flow that much power to the wheels though.
.063 I believe Mike..

[turboten5]

I wonder if the new mod motor drag radial record holder says the same thing.. he only ran a 7.9x@170 something MPH. :confused:

edit - here's the post..

You might want to wonder cause he or nor you are record holders..LOL

He aint beating Wolfe or Big Daddy with that mod motor

[dan03mach]

What size orfice is in question here?

And if they didnt make a complete 200 then they didnt flow 200....But if you want to measure at the crank...sure they made it there...Im assuming you tried to get these noids to flow that much power to the wheels though.
They would only do 125 to the rear tires when I had them in..

[turbostang]

You might want to wonder cause he or nor you are record holders..LOL

He aint beating Wolfe or Big Daddy with that mod motor

First off, I don't have a mod motor. I could care less who is the record holder. He was also running a turbo that is in the neighborhood of 40MM smaller than wolfe did on his 7.4x pass - think that makes a difference?

...not to mention, the two cars in this post are street cars and don't operate on the budget of Bid Daddy or Wolfe.

[Nate]

First off, I don't have a mod motor. I could care less who is the record holder. He was also running a turbo that is in the neighborhood of 40MM smaller than wolfe did on his 7.4x pass - think that makes a difference?

...not to mention, the two cars in this post are street cars and don't operate on the budget of Bid Daddy or Wolfe.
120+cubes smaller too.

[JACKASS RACING]

you'd better hope it doesn't go ahead and lift that ring land completely off when you spray it and you bounce that piece of piston around in there where there's no room for it....that rebuild will get a lil more expensive..... ;)

[BigShoe]

I'm starting the turbo project! :cool:
Good move I saw the light not to long ago.

[Txstang1]

all I know is that both of ya'lls cars were messed up sunday , so I didnt get to drag either one of ya'lls asses.:mad: that's good for ya'll though, cause you guys didnt want none of the white ghost on sunday:eek:

[Mach1Marauder]

Well it worked for me too.. LOL He pilled it up and changed all of his stuff to try to hang with my car since I put a new shortblock in and a different N20 system that made alot more power then my old set.. The old set up ran a 7.100 with stock front suspension.. Well I put all new drag suspenion on the car, took 100 more lbs out of it then I use to have, and I was making 100 more rwhp then before.. I guess he got a little Skurred.. :eek:
NO, YOU STUPID COCKBITE MUTHERFUCKER!!!!!!
YOU were the one to UP the ante and put in a forged shortblock, bigger lines, shot and 'noids because your no driving ass couldn't keep up with a fucking set up that I've had for over a year and a half with a very conservative tune! :mad:

Your little retarded ass knows everything don't ya? I tried to get you to put in a quadrant and firewall adjuster in your car for well over a year and a half, but YOU KNEW BETTER and went through how many trannys? :rolleyes:

I tried to tell you what carrier to put in you rear, but YOU KNEW BETTER and went thru how many carriers. :rolleyes:

I gave you links and told ya how to set up your control arms, but YOU KNEW BETTER and had the fuckers with over 8* POSITIVE pinion angle! :rolleyes:

Travis told ya and I told ya what to do with your new bad ass forged shortblock, but YOU KNEW BETTER and sprayed the engine with an untuned 250 shot on the engine with less than 300 miles on it.

Now EVERYONE tells you your engine is hurt and needs yo be taken down, but YOU KNOW BETTER and still gonna spray it with 200!
Go ahead and ventilate the block, because YOU KNOW BETTER than everyone! :rolleyes:

YOU KNOW BETTER, DAN!!!
YOU SURE ARE A SMART MUTHERFUCKER AREN'T YOU? :rolleyes:

[SEB]

NO, YOU STUPID COCKBITE MUTHERFUCKER!!!!!!
YOU were the one to UP the ante and put in a forged shortblock, bigger lines, shot and 'noids because your no driving ass couldn't keep up with a fucking set up that I've had for over a year and a half with a very conservative tune! :mad:

Your little retarded ass knows everything don't ya? I tried to get you to put in a quadrant and firewall adjuster in your car for well over a year and a half, but YOU KNEW BETTER and went through how many trannys? :rolleyes:

I tried to tell you what carrier to put in you rear, but YOU KNEW BETTER and went thru how many carriers. :rolleyes:

I gave you links and told ya how to set up your control arms, but YOU KNEW BETTER and had the fuckers with over 8* POSITIVE pinion angle! :rolleyes:

Travis told ya and I told ya what to do with your new bad ass forged shortblock, but YOU KNEW BETTER and sprayed the engine with an untuned 250 shot on the engine with less than 300 miles on it.

Now EVERYONE tells you your engine is hurt and needs yo be taken down, but YOU KNOW BETTER and still gonna spray it with 200!
Go ahead and ventilate the block, because YOU KNOW BETTER than everyone! :rolleyes:

YOU KNOW BETTER, DAN!!!
YOU SURE ARE A SMART MUTHERFUCKER AREN'T YOU? :rolleyes:



Tells us how you really feel BILL LOL :D

[Mach1Marauder]

Tells us how you really feel BILL LOL :D
:D

[turbostang]

shit, someone got Colonel Sanders all stirred up!

[dan03mach]

Yeap I put in a motor just to beat you.. LMFAO.. No I wanted to go fast plain and simple.. I never did beat your old times on my old motor and I never have had the car set up for the track like it is now.. So I didn't up it just for you, but you did to run with me.. I only broke one carrier, but many spider gears, O well, I didn't feel like putting in a good one at the time because I didn't have the money for it... You know what, alot of people tell me stuff all the time, and sometimes shit happens, I really don't give a fuck, I'm going to take it to the track anyway.. Yep something is messed up and I messed it up.. I can't help that.. It will just give me a nice project to work on the next couple of months..

[dan03mach]

shit, someone got Colonel Sanders all stirred up!
HUMMMM I wonder why, because it is all true.. Some people get so mad.. Maybe he is mad because his shit blew up at the track, Mine is just hurt a little, fuck it.. Maybe that 25* of timing you had, and the 70 N20 pill and the 43 Fuel pill had something to do with your intake blowing, I don't know for sure since I wasn't driving... It is suppost to be a 63 & 43 using the Compucar Nozzle like you had for a 150 shot, you were leaning out a 175 shot.. I doubt that both Solenoids stuck, unless something happend with your wiring and kept them on..

[Mach1Marauder]

shit, someone got Colonel Sanders all stirred up!
Don't get on my bad side either sucka! :p ;)

[Mach1Marauder]

HUMMMM I wonder why, because it is all true.. Some people get so mad.. LOL
Yep!
Everything I said was true!

[Maverick]

shit, someone got Colonel Sanders all stirred up!


Hell yeah...

<---- ordered KFC popcorn chicken :D

[TOMMY]

Its like my old man use to tell me and I quote "Son A Hard Head Makes A Soft Ass"

[Maverick]

Both of you fix your rides and rematch...

[90GT50]

shit, someone got Colonel Sanders all stirred up!It's ok, he's got his bitches to calm him down. :D
http://lemonodor.com/images/colonel-sanders-with-cheerleaders-s.jpg

[turbostang]

Both of you fix your rides and rematch...


then kiss and make up while your at it! :eek:

[TOMMY]

Both of you bitches fix your shit get it ready by spring cruise so Tommy can drag both of your asses...


FIXED










j/k lol

[Nate]

FIXED










j/k lol
Let John put a cam in the car... ;)

[Maverick]

It's ok, he's got his bitches to calm him down. :D
http://lemonodor.com/images/colonel-sanders-with-cheerleaders-s.jpg


LOL (I'm fixin' to catch hell)...


From left to right:

Mutherjuggz, Bill, and Forensix

[Maverick]

FIXED










j/k lol

LMAO!

[TOMMY]

Let John put a cam in the car... ;)


Dude...JOHN is doing everything to the car(..brakes..cam..spray..etc..)
but cage & tune

[Nate]

Dude...JOHN is doing everything to the car(..brakes..cam..spray..etc..)
but cage & tune
Why haven't I seen it in the shop yet then? :p

When are you getting JamesB to do the cage for you? or is someone else doing it?

[Mach1Marauder]

LOL (I'm fixin' to catch hell)...


From left to right:

Mutherjuggz, Bill, and Forensix
No mo GTGs fer you! :cool:

[momo stallion]

Hell yeah...

<---- ordered KFC popcorn chicken :D


you know you can get that with the flavor station stuff and have it soaked in buffalo sauce? i had that today. it's fan-fuckin-tastic!

[TOMMY]

Why haven't I seen it in the shop yet then? :p

When are you getting JamesB to do the cage for you? or is someone else doing it?


since i can get everything done in johns shop..romando (sp) is going to do it...

[Maverick]

No mo GTGs fer you! :cool:


LOL....finger lickin' good, huh? :D

[Maverick]

you know you can get that with the flavor station stuff and have it soaked in buffalo sauce? i had that today. it's fan-fuckin-tastic!


I'd say buy some more so the Colonel's stock will go up and he can get some more money to put Louise back together since she blew her top...

[Nate]

since i can get everything done in johns shop..romando (sp) is going to do it...
He does some very good work as well. I saw a cage he put in a car not to long ago. ;)

[Beenfetchedlately]

It had plenty of tq, but it was very fat on the hit so the intial TQ was a little lower then having it leaner on the hit.. You should know that Chris...
If its fat they will make more torque as long as its below 100% VE..Up to that point being rich is not bad. Then after that you will lean it out to get your peak HP numbers since you can (no longer at 100% VE or Peak Torque)

[Beenfetchedlately]

.063 I believe Mike..
150 with that orfice, 200 max on the 78.

[Beenfetchedlately]

Yeap I put in a motor just to beat you.. LMFAO.. No I wanted to go fast plain and simple.. I never did beat your old times on my old motor and I never have had the car set up for the track like it is now.. So I didn't up it just for you, but you did to run with me.. I only broke one carrier, but many spider gears, O well, I didn't feel like putting in a good one at the time because I didn't have the money for it... You know what, alot of people tell me stuff all the time, and sometimes shit happens, I really don't give a fuck, I'm going to take it to the track anyway.. Yep something is messed up and I messed it up.. I can't help that.. It will just give me a nice project to work on the next couple of months..Difference between my grenades and yours, I knew better before it happened and knew what to expect...You didnt and dont know any better. and went after a viper and got snake biten...You and Mike should talk to each other and build your own stuff from no on. Between the stubbornness of you two you guys might (used loosely) get something to work.

[Mach1Marauder]

If its fat they will make more torque as long as its below 100% VE..Up to that point being rich is not bad. Then after that you will lean it out to get your peak HP numbers since you can (no longer at 100% VE or Peak Torque)
Wasting your time Mike.

[Beenfetchedlately]

Wasting your time Mike.im gonna need some big titties to bring me back out of my blue face condition..Whos got some.. :D

[Mach1Marauder]

im gonna need some big titties to bring me back out of my blue face condition..Whos got some.. :D
LMMFAO!!!.................I dunno. ;)

[MadScientist]

LOL (I'm fixin' to catch hell)...


From left to right:

Mutherjuggz, Bill, and Forensix
Hey buttmunch, I'm the brunette, remember???

[Forteen3GT]

Well no shit he has a verter and it flashes, they can make more power on the dyno.. Damn Chris I thought you were smarter then that... I also saw what happend to Bills car too.. But you didn't see him make any new best passes did you.. 7.0's with all that extra work.. LMAO.. He was talking about 6.7's yeah right.. I don't know where you got your math from but I put down a 100 more rwhp then my old set up with just 50 more on the pill.. Hell I made 50 more with the same pills as the old set up just like Bills old set up.. My new N20 set up flows a hell alot more then the old one.. It is alot better set up.. Chris you wouldn't know since you didn't see my set up.. I didn't want none LMFAO.. Yeah sure Chris if you say so.. He had the 175 pills in it, More N20, supposily a better tune and to only run the same as he was all week.. So he put the 175 pills in instead of the 150 pills and all of the sudden it is going to run 3 tenths faster.. OK if you say so..


I cant wait ..... 3 months or so and I be bustin yo ass with a 9 inch!

[Forteen3GT]

NO, YOU STUPID COCKBITE MUTHERFUCKER!!!!!!
YOU were the one to UP the ante and put in a forged shortblock, bigger lines, shot and 'noids because your no driving ass couldn't keep up with a fucking set up that I've had for over a year and a half with a very conservative tune! :mad:

Your little retarded ass knows everything don't ya? I tried to get you to put in a quadrant and firewall adjuster in your car for well over a year and a half, but YOU KNEW BETTER and went through how many trannys? :rolleyes:

I tried to tell you what carrier to put in you rear, but YOU KNEW BETTER and went thru how many carriers. :rolleyes:

I gave you links and told ya how to set up your control arms, but YOU KNEW BETTER and had the fuckers with over 8* POSITIVE pinion angle! :rolleyes:

Travis told ya and I told ya what to do with your new bad ass forged shortblock, but YOU KNEW BETTER and sprayed the engine with an untuned 250 shot on the engine with less than 300 miles on it.

Now EVERYONE tells you your engine is hurt and needs yo be taken down, but YOU KNOW BETTER and still gonna spray it with 200!
Go ahead and ventilate the block, because YOU KNOW BETTER than everyone! :rolleyes:

YOU KNOW BETTER, DAN!!!
YOU SURE ARE A SMART MUTHERFUCKER AREN'T YOU? :rolleyes:

Damn....... ought to call you Hutto's papa...... but Hutto would take offense..... (and I met his dad and he is a pretty nice fella (not as much sarcasm as you seem to put off)

ROTFLMAO..... Cockbite MF'er!!!! lol :D :D

[turbostang]

I cant wait ..... 3 months or so and I be bustin yo ass with a 9 inch!

:confused:

[Txstang1]

:confused:
lol......

[Phoenix383]

Tells us how you really feel BILL LOL :D

Hell At least I did't need my reading glasses for it this time! ;)

[Phoenix383]

Damn....... ought to call you Hutto's papa...... but Hutto would take offense..... (and I met his dad and he is a pretty nice fella (not as much sarcasm as you seem to put off)

ROTFLMAO..... Cockbite MF'er!!!! lol :D :D

I still think Huttos real dad was the postman! :D

[Mach1Marauder]

BTW I ran some 6.7's out our local track in Mexico a few days before the cruise.. Too bad it went lean and messed up some rings..

Ummmmm.............Did they put timers in at Mexico? http://www.mach1registry.org/forums/images/smilies/loser.gif :rolleyes: