PDA

View Full Version : Other than Cycle Gear, where to get parts?

speed3000gt
10-05-2006, 08:05 AM
Where are some other places in DFW that have good prices on aftermarket OEM stuff? Also, if anyone on here is on DFW Sportbike, you've probably seen all the complaining about a couple of motorcycle shops not doing a good job, so which shop do you guys prefer or recommend for minor work IE brakes, chain/sprocket installation, etc...
Thanks
ram57ta
10-05-2006, 12:48 PM
for minor work IE brakes, chain/sprocket installation, etc...
Thanks

Umm....do it yourself and buy the parts online.
sonicblue
10-05-2006, 01:14 PM
Where are some other places in DFW that have good prices on aftermarket OEM stuff? Also, if anyone on here is on DFW Sportbike, you've probably seen all the complaining about a couple of motorcycle shops not doing a good job, so which shop do you guys prefer or recommend for minor work IE brakes, chain/sprocket installation, etc...
Thanks
SLM (straightline Motorsports) on pioneer parkway, between fielder and Bowen, by that blue Cooper Tire store, across from Mountain Sports. he does dirt and street, parts and work. Good guy, good prices. Ask for Todd - 817-275-2228.
the spindoctor
10-05-2006, 05:17 PM
stuff like that is so simple, you should learn to do it yourself as long as you have a garage to work in. i trust myself way more than others as far as basic mechanical skills go.

but if i had to recommend a shop, i'd say cyclewerkz in ft worth.
lwk2
10-05-2006, 07:35 PM
http://www.thegaragemahall.com/

http://texasbikerzone.com/

http://highfivecycles.com/
stunter bob
10-05-2006, 07:57 PM
screw texas biker zone..sorry..long story..but i will NEVER buy anything from that lady again
garage mahall is a good shop though..greg will always take care of you
i do work on the sides here at the house.....i can get the parts a little cheaper and do the labor pretty cheap too....just compared to dealerships and big shops
4DRSS
10-05-2006, 08:00 PM
Umm....do it yourself and buy the parts online.

yup
stunter bob
10-05-2006, 08:01 PM
www.motorcycle-superstore.com for all parts...great prices and super fast shipping
and for plugs...eff payin 12.50 a pop from honda www.sparkplugs.com 6.29 a piece for ngk iridium plugs....awesome
HobieF3
10-05-2006, 11:21 PM
Where are some other places in DFW that have good prices on aftermarket OEM stuff? Also, if anyone on here is on DFW Sportbike, you've probably seen all the complaining about a couple of motorcycle shops not doing a good job, so which shop do you guys prefer or recommend for minor work IE brakes, chain/sprocket installation, etc...
Thanks


A lot of bikes things are SUPER easy to work on. You can change your front pads in less than 10 minutes. Who wants to pay $65/hr shop labor with a minimum for that???

If you own a motorcycle, especially a sportbike or harley, you should have a garage or keep the bike in a storage unit to prevent theft. No exceptions, that and a small set of handtools is all you will ever need to do just about any maintenance there is outside of adjusting valves and changing tires. Both of which you can also do yourself and it's not nearly as hard as you think.
slam
10-05-2006, 11:26 PM
very simple




www.ebay.com
mono
10-06-2006, 08:15 AM
Scott at CycleWerkz does Great work if you are in Ft. Worth, or Zach at Nortex cycles in Dallas.
speed3000gt
10-06-2006, 08:59 AM
How many of yall are on DFWsportbike.com? I've heard good things about cyclewerkz, but GMH and Nortex have been bitched about on DFWSB.com by other riders, thats the only reason i ask about other places. I've been to nortex for all my past needs, was going to start trying out GMH but then all the complaining i heard scared me....
stunter bob
10-06-2006, 06:36 PM
screw dfwsuckass.com VIVA DALLASRIDERS!!!
speed3000gt
10-16-2006, 12:18 PM
stuff like that is so simple, you should learn to do it yourself as long as you have a garage to work in. i trust myself way more than others as far as basic mechanical skills go.

but if i had to recommend a shop, i'd say cyclewerkz in ft worth.


I can't find Cyclewerkz number anywhere, does someone here have it ??

I went to garage mahall to try them out even though everyones been bitching about them lately and now i see why. . what shitty management/customer service. for future reference and to anyone looking to go there for motorcycle service, IT IS NOT WORTH THE RIDE!
the spindoctor
10-16-2006, 07:13 PM
http://www.cyclewerkz.com/
ishc54
10-16-2006, 07:48 PM
Try Julian or Zack at Nortex ,, they will hook u up.. and will treat you like a friend... i have never seen people bitch about Nortex.. but i have been there when i see lotsa fools go in and ask for 2984787432147 prices and everytime u give them a price they say.. well i can get it cheaper at blah blah blah... lmao..

ANyways.. GMH aint worth the drive.. if u are in FTW.. i would hit Scott at cycle works for sure..