PDA

View Full Version : Keyless entry install


usmcluke
07-25-2006, 07:37 PM
I have a car alarm with the keyless entry stuff built in but the install manual says there are several different types of door lock systems. Type A through H. Does anyone know what type a 90 is?

dman
07-26-2006, 11:21 AM
90 should be neg. pulse door lock system. be sure to use diodes. call if you need color code.

dennis
thunder audio
972-418-6100

DLinkOZ
07-26-2006, 12:27 PM
Pink w/yellow is lock, pink w/light green is unlock.

zcs626
07-26-2006, 01:15 PM
Pink w/yellow is lock, pink w/light green is unlock.
might help if he had the location... theyre in either kick panel, and they are a 5 wire system. here:

12volts - yellow ignition harness

Starter - red/blu or wht/pink ignition harness

Ignition - red/green ignition harness

Power Lock - pink/yellow (5wi) either kick panel

Power Unlock - pink/green (5wi) either kick panel

Parking Lights+ brown light sw or dr. kick

Door Trigger black/blue + at pin switch in kick

Trunk/Hatch Release purple/yellow + at switch

Tachometer dk. green/yellow AC coil or diagn. plug

Horn Trigger yellow/lt. green - steering column

dman
07-26-2006, 01:47 PM
zcs is correct, they are 5 wire unless you have factory keyless, then you can catch - wires at module. On a 5 wire, best to let someone do the keyless entry for you unless you are familier with relays, etc. Might check with your local audio store, or at least buy a dei relay pack.

DLinkOZ
07-26-2006, 05:50 PM
I showed him a schematic of the whole thing today, and giving it to him to keep tomorrow. So he's got it :)

DECHman
07-28-2006, 03:42 PM
Factory keyless entry on a 90's era Mustang hmmmmmmmmmm........

dman
07-30-2006, 07:03 PM
yes, hmmmmmm. late model.

i guess big difference of being worker bee or owning the hive, lol. or backyarder, lol