Finaly got the motor back.

[slow55]

After blowing it up at ennis last month we finaly got the motor back today.
changed heads,intake,nitrous,cam and putting a new msd 7531 Programmable box in. I got alot done today since i didn't even get the motor to the shop until 5.
Hopfully i will have it finished tomorrow and be able to go test saturday somewere. sorry for the quality of the pics, I had to use my cell to take them with.

http://i23.photobucket.com/albums/b390/koth483/file135.jpg
http://i23.photobucket.com/albums/b390/koth483/file12.jpg
http://i23.photobucket.com/albums/b390/koth483/file111.jpg

[Nate]

Looks good Rat...I think another Outlaw car MAY be testing Sat as well...

[Bad89stang]

Got plumbing?



Badass motor BTW.

[OrangeChevyII]

As my 6 year old son would say..........Whus dat? :D

[Adam]

Thats a bad lookin motor.....

[turboten5]

Looks like a promod set up, i hope it runs a 4.30 or better with that much stuff

[Nate]

Looks like a promod set up, i hope it runs a 4.30 or better with that mucj stuff
Outlaw motor...run some 60's though.

[slow55]

As my 6 year old son would say..........Whus dat? :D
lil ole 632. :D
messing with these damn things sure make me miss simple street cars.
You would think with the front end off and radiator out of it that it would be simple to work on. Wrong. I just can't wait to do all the wiring tomorrow, I'm so extided about it I think i'm going to go out in the front yard and do back flips.

[gravygraber59]

Looks good. :D

[turboten5]

Outlaw motor...run some 60's though.

60,s ?? Oh ok i get it on motor

[slow55]

Looks like a promod set up, i hope it runs a 4.30 or better with that much stuff
Your not very bright are you?

[turboten5]

Your not very bright are you?


i was basing it on SBF,s run 4.90 range with little motors 2900lbs or so


I guess my ?? is why does it take these monster BBC to run where they do

[SNEAKY]

i was basing it on SBF,s run 4.90 range with little motors 2900lbs or so


I guess my ?? is why does it take these monster BBC to run where they do
cause the SBF are running gobs of boost.

[turboten5]

cause the SBF are running gobs of boost.

i thought that glidden guy had sbf and 2 foggers

[SNEAKY]

i thought that glidden guy had sbf and 2 foggers
at 2600lbs, but he is also running in the 4.5x range. billy does not run the black GT in much beside FFW. slow55's car weighs in around 3200lbs if i am not mistaken.

[slow55]

anytime you pressurize something it will make power. The reason turbo guys run small blocks is because a turbo will only move so much volume and it's easier to fill the something with a short stroke and bore.
You take a 420 inch small block set up for a turbo it makes probaly 650 hp without boost. ad boost to it and the power jumps up to 2000 plus. You take a big inch nitrous motor and they make around 1200/1500 hp depending on size heads etc and throw about 650 hp worth of nitrous on it and it makes 2000 plus hp.
there are plenty of ways to make power but the end result is the same.

[SNEAKY]

what car are you racing now RatMan, AKA RatPoison.

[OrangeChevyII]

Thats bitch is bad, I bet you spent more money in the A/N fittings than my whole motor cost! :eek:

[slow55]

i thought that glidden guy had sbf and 2 foggers
billys car runs a big small block with a clutch and weighs 2480 pounds.
put it at out legal weight of 3000#s with a clutch and that thing probaly would run that good.
Jeff Naiser had a small block in his car with a clutch and at 3000#s went a 4.62.
Billy tried to match race him many times but would never add weight to his car to make it even.

[slow55]

what car are you racing now RatMan, AKA RatPoison.
it's a blue 67 camaro that used to belong to Travis orr.

[BigShoe]

What brand nitrous kits are those ?and what did you have before?

[SNEAKY]

it's a blue 67 camaro that used to belong to Travis orr.
sweet, i think i heard that. didn't it tag the wall last year?

[Pro Trash]

[QUOTE=slow55]After blowing it up at ennis last month we finaly got the motor back today.
changed heads,intake,nitrous,cam and putting a new msd 7531 Programmable box in. I got alot done today since i didn't even get the motor to the shop until 5.
Hopfully i will have it finished tomorrow and be able to go test saturday somewere. sorry for the quality of the pics, I had to use my cell to take them with.

[QUOTE]

Very Nice engine

[Futurama]

wow, thats like my motor if it were in a movie with 200 terminaters and a few atom bombs.

<---not worthy, and a lil scared.

[slow55]

sweet, i think i heard that. didn't it tag the wall last year?
No this car has never been wrecked.

[slow55]

What brand nitrous kits are those ?and what did you have before?
Both kits are nos. just this one has the ss lines and is brand new. i didn't meen a different type of kit. my bad

[slow55]

Outlaw motor...run some 60's though.
I don't think i have the power to run 60s with this set up. I know it's not going to right now in this type of heat but even in good weather this should be a low 70 car maybe and thats a big maybe a 68 or 69 in perfect weather. Right now i'm hoping for high 70s low 80s.

[Jaded]

I don't think i have the power to run 60s with this set up. I know it's not going to right now in this type of heat but even in good weather this should be a low 70 car maybe and thats a big maybe a 68 or 69 in perfect weather. Right now i'm hoping for high 70s low 80s.
If you get consistent with low 70's you might be able to be pretty competitive at KOTH. Good luck man.

[Andrew]

Looks good man! I can't wait to see it run. Hopefully I've got something for ya though! ;)

[ScottEvil]

Looks good Robert, let me know when y'all test it out.

[slow55]

Looks good Robert, let me know when y'all test it out.
I ran into some problems today and ran out of time to go testing. The msd wouldn't tansfer data for some reason and i can't find any #16 fittings to hook up the water lines.
We will be ready to test wendsday and run friday night. Come on out