Time and MPH ?

[gloomleader]

I was just wondering why my time was the same if I ran 3 mph faster than usual.

Last sunday I ran a 7.85 @ 85 mph

Tonite I ran a 7.86 at 88.59 mph

How are times calculated, was there a fault in the system tonight? LMK ASAP :confused:

[GRAYHORSE]

what were the 60's on each run?

[gloomleader]

the first one is 1.746


the second was 1.80

[GRAYHORSE]

the first one is 1.746


the second was 1.80


Thats a big part of it. You probaby spun a lot more on the second time posted.

[gloomleader]

I may be needing a new pair of slikolas.............These are pretty old...

Do you think maybe without the spin and the higher mph my time would increase to ?

[mean90]

yes your times will be lower i would say about 1 tenth if you get the same 60 or lower. you might even be able to get 2tenths lower. you loose alot down low spinning.

My 98 with the stock 98 motor went with full bolt on dynoed 205 hp with 298 ftlbs. i cut a 1.80 60 and ran a 9.0000 at like 77 or something like that.

with the 2000 pi motor is dynoed at 257hp and 305 tq and with a 2.00 60 i went 9.014 at 81 mph so if i cut the same 60 fut i probably could have gotten a 8.6 or better with a lower 60 ft