PDA

View Full Version : What does a 99GT weigh? How fast should it go?

Duncan
08-14-2005, 04:55 AM
99GT cloth all power nothing taken out, trying to get general idea of weight. 450hp 450lb ft 3.73 gears 5 speed. Should go 11's...yes? Anyone with similar setup? Anywhere close to Frisco that can weigh my car? Thanks in advance.
OMEGA DOOM
08-14-2005, 05:23 AM
99GT cloth all power nothing taken out, trying to get general idea of weight. 450hp 450lb ft 3.73 gears 5 speed. Should go 11's...yes? Anyone with similar setup? Anywhere close to Frisco that can weigh my car? Thanks in advance.are you runnin' juice or a supercharger to get that 450???? :confused:
Duncan
08-14-2005, 05:53 AM
are you runnin' juice or a supercharger to get that 450???? :confused:

ATI intercooled D1 @14psi
Craizie
08-14-2005, 06:27 AM
i know shit about cars, or times but im gonna say low 12's on stock wieght.





Again I am a complete moron, so I dont know how well this helps you.
Craizie
08-14-2005, 06:28 AM
99GT cloth all power nothing taken out, trying to get general idea of weight. 450hp 450lb ft 3.73 gears 5 speed. Should go 11's...yes? Anyone with similar setup? Anywhere close to Frisco that can weigh my car? Thanks in advance.


Also just find a truck stop, just call around and see who has them. i know of a few places in fort worth, but that doesnt help you any.


I think just about all major truck stops along major high ways should have them.
Xavren
08-14-2005, 09:48 AM
Just a guess but say mid to high 11's
CatDaddy
08-14-2005, 01:19 PM
With the weight of the Procharger, intercooler and piping, weight's going to be 3350-3375 without driver. If you run slicks, ET Streets or ET DRs, you should get low 12's out of it. Put a methonal injection kit on it and add some timing back in and you will see 11's easy enough :)
MR TINFOIL HAT
08-14-2005, 01:30 PM
You need to run ralph, He has the same hp as you just 540 tq. Go to ennis you can weigh your car at the races. Do you still live down the street from ralph? Give that boy a call, we saw your car up at hpp not too long ago looks good! David
Duncan
08-14-2005, 06:50 PM
I havent seen Ralph in some time (he lives 1 block over...go figure), I need to get to the track but my schedule doesnt allow this very easily. Ennis used to be open on Sundays, but I dont think they have been for a while now. What is Ralph running? I guess I'm suprised to only hear 12's, only one way to find out. Thanks again.
MR TINFOIL HAT
08-14-2005, 07:51 PM
He hasn't run the 1/4 because his 4.30 gears. His 1/8 times were 8.1xx he was spinning through 2nd and 3rd He needs to get some slicks. He was running 7.40 at 95 with 3.73 gears and his old dry kit. I would think he should be low 7's now. We'll have to go out to denton sometime and find out. take care.
Duncan
08-14-2005, 08:07 PM
I'm planning on going as soon as I can get a Sat off. I'll have to call him one of these days, or I guess I could drive by.
MR TINFOIL HAT
08-14-2005, 08:23 PM
I'm down to roll out to denton. I'm about 70 hp short of you boys but i'll run em. Go by his house and motivate his ass to buy some slicks :D
Duncan
08-14-2005, 08:29 PM
Dont want to do that, I am running on street tires. I'm sure I have the advantage @ 90 less ft lb
ALLAN
08-14-2005, 08:41 PM
A little under 3200 with no options and 16 in wheels.
Duncan
08-14-2005, 09:01 PM
Its an easy 3400lbs then, with these heavy ass wheels and options.
Juiceweezl
08-14-2005, 09:06 PM
99GT cloth all power nothing taken out, trying to get general idea of weight. 450hp 450lb ft 3.73 gears 5 speed. Should go 11's...yes? Anyone with similar setup? Anywhere close to Frisco that can weigh my car? Thanks in advance.

Back when my car was only putting down mid 360's RWHP and about 340 RWTQ with 8psi and 3.73's, O/R-H, and Nitto Drag radials, I ran 12.50's. I'm doing a build now and shooting for 480-500 at the wheels. I see no reason why your shouldn't go high 11's once the weather cools off. The key is going to be getting out of the hole. Do you still have the stock clutch?
Duncan
08-14-2005, 09:27 PM
Ram 900 11" clutch w/11" alumn flywheel
ALLAN
08-14-2005, 09:43 PM
Back when my car was only putting down mid 360's RWHP and about 340 RWTQ with 8psi and 3.73's, O/R-H, and Nitto Drag radials, I ran 12.50's. I'm doing a build now and shooting for 480-500 at the wheels. I see no reason why your shouldn't go high 11's once the weather cools off. The key is going to be getting out of the hole. Do you still have the stock clutch?


What was your mph?? I was running 12.5@110 with 305 rwhp.
aggie97
08-14-2005, 11:04 PM
my car stock without a passenger seat, jack and spare was 3140lbs.

with 250/296 it ran a 13.02.....with 200hp more and about 3500 race weight...AND TRACTION, you should be knocking on the door of 11's.....got cage?
Darren M
08-16-2005, 12:23 AM
Aggie97, you're car would be faster if it were setup for the 1320 and you know it. Quit sandbagg'n. Don't make me call you out, I've still got the snow tires!
aggie97
08-16-2005, 08:07 PM
Aggie97, you're car would be faster if it were setup for the 1320 and you know it. Quit sandbagg'n. Don't make me call you out, I've still got the snow tires!


Yeah, but you haven't seen the new toyos!!! They are gummy like BFG DR's, if not better for off the line. Go look at the results from the last AX where Dean's EVO was previously 2-3 full seconds faster....now he was .250 seconds. Traction off the line was staggering!!!