kwik46gt
08-13-2005, 02:10 PM
I recently got the shaft on a car I bought.
FS or TRADE!!! Built Stang
--------------------------------------------------------------------------------
This is my baby.... Looking for something like a coupe or what ever... You never know what I will trade for.... I have ALOUT of $$$$$$ And time in this car... I just put a NEW PROFORM carb on it and it Runs VERY STRONG!! GREAT street strip car.. Everything is still new Here is a few things the car has.....
Msd Dis. & Wires
Msd Dig. 6 Ignition Box
Crane Gold Race 1.6 Roller Rockers
Crane Hardened Push Rods
Comp cams solid roller cam
Comp cams solid race roller lifters
Mac ceramic coated long tube headers
3 inch X-Pipe with 2 chamber flows dumped
Edelbrock performer RPM intake (ported & polished)
Holly 950 Carb (HP series)
Edelbrock performer heads (Fully worked)
All ARP fasteners
Built 347 Stroker 28 oz. balanced
Race preped 68 block
Eagle 4340 Forged crank
Eagle H- Beam ESP rods
Ross High dome Pistons
Hellfire file fit rings
Moroso Solid motor mounts
ARP:
Head Studs, Rod Bolts, Main Studs, Etc.
Electric Fan
1/2 Blue fuel line
Big Holly Blue Pump
Dss Main gurdle
Pod Gauges
Russell Fuel Log
Welded subframe connectors
Carvinies 4 in. Hood
Custom Paint
Welds 3 1/2 in front 8 in. in back Mt brag radels
Built AOD-E
9 1/2 Stall
Built good for 1500 HP.
Baumann Trans Control System with lap top
SCH aluminum Control Arms
Eibach Drag Suspention with Bag
Lakewood 50/50 drag shocks
Built rearend with 4.10 gears
etc etc.....
this is the car I bought or I thought that I bought. After gettting the car to run and several tests I found that the pistons are installed 180 deg. off. leaving me with a worthless motor and 7:1 compression. now I have to rebuild the motor and god only Knows how much I will have to pay a machine shop to do so. he now has another car for sale on DFWSTANGS.NET
http://www.westsidemustangs.com/forums/index.php?topic=55121.0
FS or TRADE!!! Built Stang
--------------------------------------------------------------------------------
This is my baby.... Looking for something like a coupe or what ever... You never know what I will trade for.... I have ALOUT of $$$$$$ And time in this car... I just put a NEW PROFORM carb on it and it Runs VERY STRONG!! GREAT street strip car.. Everything is still new Here is a few things the car has.....
Msd Dis. & Wires
Msd Dig. 6 Ignition Box
Crane Gold Race 1.6 Roller Rockers
Crane Hardened Push Rods
Comp cams solid roller cam
Comp cams solid race roller lifters
Mac ceramic coated long tube headers
3 inch X-Pipe with 2 chamber flows dumped
Edelbrock performer RPM intake (ported & polished)
Holly 950 Carb (HP series)
Edelbrock performer heads (Fully worked)
All ARP fasteners
Built 347 Stroker 28 oz. balanced
Race preped 68 block
Eagle 4340 Forged crank
Eagle H- Beam ESP rods
Ross High dome Pistons
Hellfire file fit rings
Moroso Solid motor mounts
ARP:
Head Studs, Rod Bolts, Main Studs, Etc.
Electric Fan
1/2 Blue fuel line
Big Holly Blue Pump
Dss Main gurdle
Pod Gauges
Russell Fuel Log
Welded subframe connectors
Carvinies 4 in. Hood
Custom Paint
Welds 3 1/2 in front 8 in. in back Mt brag radels
Built AOD-E
9 1/2 Stall
Built good for 1500 HP.
Baumann Trans Control System with lap top
SCH aluminum Control Arms
Eibach Drag Suspention with Bag
Lakewood 50/50 drag shocks
Built rearend with 4.10 gears
etc etc.....
this is the car I bought or I thought that I bought. After gettting the car to run and several tests I found that the pistons are installed 180 deg. off. leaving me with a worthless motor and 7:1 compression. now I have to rebuild the motor and god only Knows how much I will have to pay a machine shop to do so. he now has another car for sale on DFWSTANGS.NET
http://www.westsidemustangs.com/forums/index.php?topic=55121.0