View Full Version : Dynamat install?
Darkstang
08-09-2005, 11:13 AM
Who in Dallas installs dynamat in the trunk of 02 GT and does good system install. For a good price and someone that does quality work. Thanks
< Sells and installs Dynamat. It is easy to install but time consuming so the labor is high.
zcs626
08-09-2005, 11:50 AM
< Sells and installs Dynamat. It is easy to install but time consuming so the labor is high.
yep, dynamat...works so well, but is just tedious to put on.
5.0_CJ
08-09-2005, 12:11 PM
try be-quiet brownbread - just stick it on, thinner and better dampening in tests, and 1/3 the price.
http://www.b-quiet.com/
Darkstang
08-09-2005, 12:40 PM
Yeah I know it takes alot of time. Thats why I decided to get someone to do it for me. Thanks for the link.
Darkstang
08-09-2005, 12:41 PM
How much would I need to cover the trunk? Thanks
try be-quiet brownbread - just stick it on, thinner and better dampening in tests, and 1/3 the price.
http://www.b-quiet.com/
might be better than dynamat original but not dynamat xtreme.
Labora
08-09-2005, 04:34 PM
If you are to lazy to cut sheets, clean surfaces, etc. For the dynamat you can try the paint on sound deadener like Edead. Goes on alot quicker.
5.0_CJ
08-09-2005, 07:00 PM
might be better than dynamat original but not dynamat xtreme.
thats why they have b-quiet extreme.
dynamat is over priced, its not rocket science.
zcs626
08-09-2005, 10:20 PM
thats why they have b-quiet extreme.
dynamat is over priced, its not rocket science.
not if you get it at cost :)
The new extreme stuff is very easy to install. You can cut it with a box cutter and it sticks to anything. The old dynamat was crap, you had to have a very clean surface. I paid $175 for their big box and it was more than enough to do my hatch (double layer on the rear wall), the floor pan under the back seats and a layer on both door skins as well as the inner structure on my old Talon. I still have probably half a sheet left!
5.0_CJ
08-10-2005, 11:44 AM
I think I laid down ~130 for 100 sq ft. of brownbread, and dynomatted the entire tub on the vette, doors, roof, under seats, center console, firewall, inside and outsire of fender wells.
For cost, dynamat probably isn't that expensive, but b-quiet stuff is very very impressive.
vBulletin® v3.8.1, Copyright ©2000-2009, Jelsoft Enterprises Ltd.