White Z28 and black Z28 at Dale last night?

[Beenfetchedlately]

Anyone see the white Z28 that was running last night...He claimed he was pulling the wheels....I didnt see it and was hoping somene could post a video of it if you got it. I know the trans is fubared from Chris R tuning being too lean like always with his tune and being too lean means no line pressure in the trans. HAHAHAAHHA Fucking gimp!

Seriously ummm anyone got video if it not yanking the wheels?

Mike

[6secNaLs1]

Anyone see the white Z28 that was running last night...He claimed he was pulling the wheels....I didnt see it and was hoping somene could post a video of it if you got it. I know the trans is fubared from Chris R tuning being too lean like always with his tune and being too lean means no line pressure in the trans. HAHAHAAHHA Fucking gimp!

Seriously ummm anyone got video if it not yanking the wheels?

Mikethats me with the black z i went a 6.75 lass night on motor CAM ONLY...i dont know about the white z but i know my shit was leaving like a rocket ask the guy in the 68 ish camaro...

[Lane]

Congrats Jake!

Carlos run last night?

[6secNaLs1]

Congrats Jake!

Carlos run last night?nope he had to work
thanks im gettin it down there..

[bgmz282]

LS1 or LT1 cars ?

[Beenfetchedlately]

LS1 or LT1 cars ?
ls1

[6secNaLs1]

LS1 or LT1 cars ?man come on ls1

[Beenfetchedlately]

Congrats Jake!

Carlos run last night?

He talked about going but didnt come out afterall...

I hear donald has made some passes here lately too and im not sure if it went faster or not though.

Mike

[Beenfetchedlately]

thats me with the black z i went a 6.75 lass night on motor CAM ONLY...i dont know about the white z but i know my shit was leaving like a rocket ask the guy in the 68 ish camaro...

I didnt recognize you bro.

Any videos of the White Z pulling the wheels? I could tell its got a BIG motor stall in it. I was wondering if it had heads on it?

My car cam only, nitrous setup runs what he does.....with a TIGHT converter!

:eek:

Mike

[dan03mach]

Anyone see the white Z28 that was running last night...He claimed he was pulling the wheels....I didnt see it and was hoping somene could post a video of it if you got it. I know the trans is fubared from Chris R tuning being too lean like always with his tune and being too lean means no line pressure in the trans. HAHAHAAHHA Fucking gimp!

Seriously ummm anyone got video if it not yanking the wheels?

MikeHey Mike I was there on the line every run.. It pulled the left wheel just about every run.. On one run it pulled both, that was when he ran 7.001@98.18mph... 1.54 60ft.. I know all the times because I was getting his slips.... If the tranny wasn't slipping on the 2nd to 3rd shift it would of been in the 6.9's for sure..

[dan03mach]

I didnt recognize you bro.

Any videos of the White Z pulling the wheels? I could tell its got a BIG motor stall in it. I was wondering if it had heads on it?

My car cam only, nitrous setup runs what he does.....with a TIGHT converter!

:eek:

Mike
Hey Mike how much does your car weigh??? The White Z I think weighs in around 3400 lbs.. With out Driver..

[Cmarsh93z]

Hey Mike how much does your car weigh??? The White Z I think weighs in around 3400 lbs.. With out Driver..

Is it cam only?

[dan03mach]

Is it cam only?No it has heads too.. I don't know what kind or how much they flow though..

[6secNaLs1]

I didnt recognize you bro.

Any videos of the White Z pulling the wheels? I could tell its got a BIG motor stall in it. I was wondering if it had heads on it?

My car cam only, nitrous setup runs what he does.....with a TIGHT converter!

:eek:

Mike
i was the cam only car out there bustin ass...

[Saladbar]

man come on ls1

yea.. there are no fast LT1's anywhere.. sheesh.

[6secNaLs1]

He talked about going but didnt come out afterall...

I hear donald has made some passes here lately too and im not sure if it went faster or not though.

Mike
donald went a 6.85 lass night

[Andrew]

i was the cam only car out there bustin ass...

you said that already...

[6secNaLs1]

yea.. there are no fast LT1's anywhere.. sheesh.yeah i know i was hopin racing reid was gonna be out there he owes me a race...saladbar your a lt1 but you went to ennis lass night should have come to k dale.. it was a blast

[Saladbar]

yeah i know i was hopin racing reid was gonna be out there he owes me a race...saladbar your a lt1 but you went to ennis lass night should have come to k dale.. it was a blast


LOL.. nuh uh.. My shit needs a shot of nitrous just to keep up w/ the cammed A4 LS1's. I'll race the riceboys :)

[Mr. Clean]

you could hear the second to third shift slip everytime from the stands in the white z I didn't see the wheels come up ,but like I said I was in the stands not by the car like Dan I think it wouldv'e con 6.90's too if the tranny wasn't slippin JMOP

[6secNaLs1]

you said that already...
sorry juss a little happy

[Mr. Clean]

gone not con typo oops Mr.C

[dan03mach]

Hey Jake come on over and help me throw this tranny in later on.. I'm picking it up around 3:00 I'll be back to the house around 4:00..

[6secNaLs1]

Hey Jake come on over and help me throw this tranny in later on.. I'm picking it up around 3:00 I'll be back to the house around 4:00..
i can come tomorrow in the morning

[dan03mach]

i can come tomorrow in the morningWell if I don't get it in tonight, that would be great.. I have to take the compressor back to my Dad's house Sun. sometime.. So I need to get it done quickly so he doesn't start bitching anymore..

[Beenfetchedlately]

Hey Mike I was there on the line every run.. It pulled the left wheel just about every run.. On one run it pulled both, that was when he ran 7.001@98.18mph... 1.54 60ft.. I know all the times because I was getting his slips.... If the tranny wasn't slipping on the 2nd to 3rd shift it would of been in the 6.9's for sure..

Earth to Dan...Wake up Dan! The car didnt pull the wheels...Just extended the front struts bro. Side note, how can you see the left front tire when he was in the right lane all night and you were on the other side of the guardrail!!!! ;)

Ok, if it did pull the wheels. ill give him mayebe an inch at most. Nothing like his compradre Jake over the with some true wheels up shit man :)

that car isnt right, the heads ar junk on it and its a mixed match combo. Ive heard that the car will wrun 6.60's, 6.70's, even 6.80's but theres alot to fix on the car just to get it in the 6.80's. IM just tired of hearing all the bs.

If yall want to line up with me. You know im down but i dont think that BIG motor stall will handle up with my nitrous car :)

Have fun with the post. Im back in the garage putting my rear end back together.

Mike;)

[Beenfetchedlately]

Hey Mike how much does your car weigh??? The White Z I think weighs in around 3400 lbs.. With out Driver..

About the same with me in it too. Strap a bottle on it and lets get after it

[Beenfetchedlately]

donald went a 6.85 lass night

I just read that....Tight...

[Beenfetchedlately]

you could hear the second to third shift slip everytime from the stands in the white z I didn't see the wheels come up ,but like I said I was in the stands not by the car like Dan I think it wouldv'e con 6.90's too if the tranny wasn't slippin JMOP

Thank you for including your comments. Exactly how i saw it too. Just extending the struts an leaving. If you wanted to see some wheels up you should have seen Wolfe driving Nelsons car on the first pass...That was wheels up.

[bgmz282]

yea.. there are no fast LT1's anywhere.. sheesh.



ive got one that may shock you a little bit

[bgmz282]

if u wanna race another respectable LT1 car ....... look up screename 97redss......... his name is cody

[02ssMan]

Earth to Dan...Wake up Dan! The car didnt pull the wheels...Just extended the front struts bro. Side note, how can you see the left front tire when he was in the right lane all night and you were on the other side of the guardrail!!!! ;)

Ok, if it did pull the wheels. ill give him mayebe an inch at most. Nothing like his compradre Jake over the with some true wheels up shit man :)

that car isnt right, the heads ar junk on it and its a mixed match combo. Ive heard that the car will wrun 6.60's, 6.70's, even 6.80's but theres alot to fix on the car just to get it in the 6.80's. IM just tired of hearing all the bs.

If yall want to line up with me. You know im down but i dont think that BIG motor stall will handle up with my nitrous car :)

Have fun with the post. Im back in the garage putting my rear end back together.

Mike;)
First off what do you care. So I am not the fastest car with heads and cam, but I never claimed to be. I don't know why all this bs talking. So you are faster than me, do you really think it bothers me? I just don't understand what the big deal is hear. I just bought the car 2 months ago. I am going to switch to a turbo 350 and a better stall in time. So basically my point is just let it go. I don't give anyone else any bs so just let me be . Thank you for your time...... :D

[DMcRacer]

He talked about going but didnt come out afterall...

I hear donald has made some passes here lately too and im not sure if it went faster or not though.

Mike

My car wont be going any faster till I replace the valve springs. Actually, it wont be going at all till I fix the rearend after last night. Atleast it held up long enough to put me in the winners circle last night.

Carlos should be out tonight.

Congrtas on the times Jake!

[6secNaLs1]

My car wont be going any faster till I replace the valve springs. Actually, it wont be going at all till I fix the rearend after last night. Atleast it held up long enough to put me in the winners circle last night.

Carlos should be out tonight.

Congrtas on the times Jake!
thanks man..its always something with these cars..good luck on getting it fixed..

[Cmarsh93z]

My car wont be going any faster till I replace the valve springs. Actually, it wont be going at all till I fix the rearend after last night. Atleast it held up long enough to put me in the winners circle last night.

Carlos should be out tonight.

Congrtas on the times Jake!

Congrats Jake! Donald...you need Lsx, 4.10's now, and a tranny rebuild!

[Mr. Clean]

chris m I liked the low rider avatar better!!

[6secNaLs1]

Congrats Jake! Donald...you need Lsx, 4.10's now, and a tranny rebuild!
chris you think those fast intakes work pretty good i was gonnna get one but peak power on a buddys car was like 8 but at like 4500 it was 18 hp..my converter flashes 5400 want i flash right over the power ???

[DMcRacer]

Congrats Jake! Donald...you need Lsx, 4.10's now, and a tranny rebuild!


So basically what your saying is, I need to either rob a bank or find a part time job :D My 2-3 shift was pretty sloppy last night.

[Cmarsh93z]

chris you think those fast intakes work pretty good i was gonnna get one but peak power on a buddys car was like 8 but at like 4500 it was 18 hp..my converter flashes 5400 want i flash right over the power ???

I have just seen good stuff from the 90/90 swap. We'll see how it works on Carlos car....I wouldn't put total faith in just the dyno numbers though! I bet you would pick up a mph or two with it..maybe 1 or 2 tenths in the 1/8. Doesn't sound like much, but a 6.5 timeslip reads alot better than a 6.7 ;) ;)

Chris

[Cmarsh93z]

So basically what your saying is, I need to either rob a bank or find a part time job :D My 2-3 shift was pretty sloppy last night.


If you do rob a bank, grab atleast a handfull for me....I won't say anything!

Chris
$1 pimpen

[6secNaLs1]

I have just seen good stuff from the 90/90 swap. We'll see how it works on Carlos car....I wouldn't put total faith in just the dyno numbers though! I bet you would pick up a mph or two with it..maybe 1 or 2 tenths in the 1/8. Doesn't sound like much, but a 6.5 timeslip reads alot better than a 6.7 ;) ;)

Christhats what i figured...i get a extra check this month ill pick one up and see what it does..dyno numbers dont mean shit..i put down 375 hp and run 6.7X

[jzmolik123]

anybody know the guy in the green vette w/ 20's at kdale last night. i ran him twice in my lightning and was just wanting to know if he was on this board. if anybody know him ask him if he wants to run tonight at redline.

[jzmolik123]

for 100

[Cmarsh93z]

thats what i figured...i get a extra check this month ill pick one up and see what it does..dyno numbers dont mean shit..i put down 375 hp and run 6.7X

Exactly! Right now, I have the MAF hooked up on Carlos car, but I am going to work on a Speed Density setup for the car, so all you will see under the hood is a honkin 90mm TB. I think Donald put down around ~380 unlocked when I dynoed it last year too.

Chris

[Saladbar]

if u wanna race another respectable LT1 car ....... look up screename 97redss......... his name is cody


I'll run him :)

[6secNaLs1]

Exactly! Right now, I have the MAF hooked up on Carlos car, but I am going to work on a Speed Density setup for the car, so all you will see under the hood is a honkin 90mm TB. I think Donald put down around ~380 unlocked when I dynoed it last year too.

Chris
cool im gonna try another converter..its a 4800 made from the company that made mine...so that should help a little we will see

[PooterWS6]

cool im gonna try another converter..its a 4800 made from the company that made mine...so that should help a little we will see
You have a trans brake?

And the stock rear still?


You helped on my cam install a while back :cool:
<-Wade

[6secNaLs1]

You have a trans brake?

And the stock rear still?


You helped on my cam install a while back :cool:
<-Wade
no brake and still stock rear end..yeah i member you hows the cam working out

[Nate]

cool im gonna try another converter..its a 4800 made from the company that made mine...so that should help a little we will see
get your 60ft's down and you will be in .6xx's :cool:

[PooterWS6]

no brake and still stock rear end..yeah i member you hows the cam working out
Runs great!
No dyno or track times yet, still have the same bald ass tires on it.
Cant afford new ones yet. :o

Are you launching off the footbrake or idle?
(How is that stock rear still holding with slicks?:p)

And hows your mpg?( I know you have a th350) but with my 6spd im gettin 13-14 in city :mad:(babyin it the whole way) tune is rich as fuck!

[6secNaLs1]

Runs great!
No dyno or track times yet, still have the same bald ass tires on it.
Cant afford new ones yet. :o

Are you launching off the footbrake or idle?
(How is that stock rear still holding with slicks?:p)

And hows your mpg?( I know you have a th350) but with my 6spd im gettin 13-14 in city :mad:(babyin it the whole way) tune is rich as fuck!
off foot brake 3100..the rear is blessed by god haha..gas mil i have no clue bad i guess

[CatDaddy]

thats me with the black z i went a 6.75 lass night on motor CAM ONLY...i dont know about the white z but i know my shit was leaving like a rocket ask the guy in the 68 ish camaro...
Nice times Jake! Hard for me to comprehend 6.7s cam only :eek: I gotta look into an LS1! :D

[Cmarsh93z]

Runs great!


And hows your mpg?( I know you have a th350) but with my 6spd im gettin 13-14 in city :mad:(babyin it the whole way) tune is rich as fuck!

That sucks man...I think Donald got over 20mpg in his going back to his house from Dallas. Let me know if you need your tune looked at...I can get you mid 20's easy, with an increase in power and drivability.

Chris

[noscrzy1]

Anyone see the white Z28 that was running last night...He claimed he was pulling the wheels....I didnt see it and was hoping somene could post a video of it if you got it. I know the trans is fubared from Chris R tuning being too lean like always with his tune and being too lean means no line pressure in the trans. HAHAHAAHHA Fucking gimp!

Seriously ummm anyone got video if it not yanking the wheels?

Mikethe white car was me playa!! wanna roll biotch??im cam only with a small 100 shot

[Beenfetchedlately]

First off what do you care. So I am not the fastest car with heads and cam, but I never claimed to be. I don't know why all this bs talking. So you are faster than me, do you really think it bothers me? I just don't understand what the big deal is hear. I just bought the car 2 months ago. I am going to switch to a turbo 350 and a better stall in time. So basically my point is just let it go. I don't give anyone else any bs so just let me be . Thank you for your time...... :D
Just posting to stir up the pot....ANd to laugh at pulling the wheels..... :rolleyes:

Get over it!

Mike

[Beenfetchedlately]

the white car was me playa!! wanna roll biotch??im cam only with a small 100 shot
Yes i would love to roll over you. How much you working with?

Mike

[noscrzy1]

Yes i would love to roll over you. How much you working with?

Mikeyour junk is slow!!!

[Beenfetchedlately]

your junk is slow!!!
Then line up next to me cash in hand on the street. What you wanna do...talk is cheap playboy lets dance.

Mike

[noscrzy1]

Then line up next to me cash in hand on the street. What you wanna do...talk is cheap playboy lets dance.

Mikei have seen your junk its slow a waste of my gas because 6.60 will not cut the mustard pee wee !!!!!!!!

[04 cobra]

Then line up next to me cash in hand on the street. What you wanna do...talk is cheap playboy lets dance.

Mike
Sure are getting cocky! I hope you get spanked, maybe the swelling will go down in that head of yours! :rolleyes: :D

[Beenfetchedlately]

Sure are getting cocky! I hope you get spanked, maybe the swelling will go down in that head of yours! :rolleyes: :D :rolleyes: :p

[302_plus_a_few]

Sure are getting cocky! I hope you get spanked, maybe the swelling will go down in that head of yours! :rolleyes: :DWhat do you mean "getting cocky". Has he ever been anything else?

[Danny]

You are what you eat.















:D Sorry Mike I couldn't resist... lol

[Beenfetchedlately]

You are what you eat.















Sorry Mike I couldn't resist... lol :mad:
:mad:

[Danny]

lol

I don't want to piss you off too bad, who else am I gonna go to for my LS1 swap? :D

[302_plus_a_few]

You are what you eat.lLMAO!! Beenfelchedlately loves da cock!

[Beenfetchedlately]

LMAO!! Beenfelchedlately loves da cock!
And kirk loves to suck the pipe..... :rolleyes:

[Beenfetchedlately]

Sure are getting cocky! I hope you get spanked, maybe the swelling will go down in that head of yours! :rolleyes: :D
Some say im cocky.....I say whhaaaat?!?! It aint braggin motherfucker if you back it up! :cool:

[04 cobra]

Some say im cocky.....I say whhaaaat?!?! It aint braggin motherfucker if you back it up! :cool:
I know, just messin with ya, I know yo shit is fast ass hell by the way you yanked me and the other jason's T/A on the highway! :D

[Beenfetchedlately]

I know, just messin with ya, I know yo shit is fast ass hell by the way you yanked me and the other jason's T/A on the highway! :D....lol....

That was the last night that Ive sprayed this car...I know there has got to be some carbon built up on those pistons...Im waiting on Archie to get a hose and then I can clean these pistons off again and keep this motor burning clean :)

Mike

[302_plus_a_few]

Some say im cocky.....I say whhaaaat?!?! It aint braggin motherfucker if you back it up! :cool:Back it up? Like all the farm animals in the area backing up to the fence when the see your white turd coming down the road?

[04 cobra]

:D :D :D :D :D ....lol....

That was the last night that Ive sprayed this car...I know there has got to be some carbon built up on those pistons...Im waiting on Archie to get a hose and then I can clean these pistons off again and keep this motor burning clean :)

Mike

[DR PEPPER]

....lol....

That was the last night that Ive sprayed this car...I know there has got to be some carbon built up on those pistons...Im waiting on Archie to get a hose and then I can clean these pistons off again and keep this motor burning clean :)

Mike
waiting on archie........

















that could take some time :D

[Beenfetchedlately]

waiting on archie........

















that could take some time :D


After that when he does get it he'll probably be waiting on me...ahaha....Damn college kids have no money. I need to find me a big girl and have her be my sugar momma!

Mike :D

[bgmz282]

I'll run him :)



id love to be there and see it

[Saladbar]

ennis.. Friday.. Tell him I'll be there :)

Or I'll tell him if I see him on AIM this week ;)