Mach1Marauder Denton tonight

[STROKD]

Not sure if you can make it on short notice, but it's not supposed to rain till after midnight, so meet me up there for some grudges if you can make it! :D

[98DSM]

What time yall heading up there?

[Mach1Marauder]

I have some parts off Louise at the moment. I'm polishing a few things to add a little mo bling!

[That_Is_My_El_Camino]

Come on, man. Put those things back on before tonight.

[Mach1Marauder]

Come on, man. Put those things back on before tonight.
I'll be back on the track soon enough! LMAO!

[That_Is_My_El_Camino]

Any later than tonight is not soon enough.

[STROKD]

I have some parts off Louise at the moment. I'm polishing a few things to add a little mo bling!
No biggie, I got my headlights working really late, so I didn't go to storage to get my DOTs. I ran a couple decent times, couldn't grab second at all in 6 runs, my synchros are shot. :( :mad:

[11secCobra]

No biggie, I got my headlights working really late, so I didn't go to storage to get my DOTs. I ran a couple decent times, couldn't grab second at all in 6 runs, my synchros are shot. :( :mad:

do i hear pro shifted TKO? :p

[Dawg-Mach1]

I'll be back on the track soon enough! LMAO!


Ha. Ha. Ha. You'll be back just in time for me to hand you the yellow (losing) E/T slip!!!

I already posted it up in the GTG forum about the "battle" on the 19th. Becareful of all that bling. It might slow you down a bit.

:D

[Mach1Marauder]

Ha. Ha. Ha. You'll be back just in time for me to hand you the yellow (losing) E/T slip!!!

I already posted it up in the GTG forum about the "battle" on the 19th. Becareful of all that bling. It might slow you down a bit.

:D
BAHAHAHAHAHAHAHAHA!! You better be glad I missed my key board!!!

[STROKD]

do i hear pro shifted TKO? :p
Hell that would be nice, you have a hook up on one at Unique? ;)

At this point, I would be happy with a new 3550, or even a rebuild on mine. It simply won't go into gear no matter how fast or hard you pull on it at any rpm under WOT. :mad: Aw well, still ran a pretty decent time and mph, so I know with a tranny it will be faster than I was expecting. :cool:

[Mach1Marauder]

Hell that would be nice, you have a hook up on one at Unique? ;)

At this point, I would be happy with a new 3550, or even a rebuild on mine. It simply won't go into gear no matter how fast or hard you pull on it at any rpm under WOT. :mad: Aw well, still ran a pretty decent time and mph, so I know with a tranny it will be faster than I was expecting. :cool:

Psssssst.............look at the new part of my sig at the bottom! :cool:

[11secCobra]

Hell that would be nice, you have a hook up on one at Unique? ;)

At this point, I would be happy with a new 3550, or even a rebuild on mine. It simply won't go into gear no matter how fast or hard you pull on it at any rpm under WOT. :mad: Aw well, still ran a pretty decent time and mph, so I know with a tranny it will be faster than I was expecting. :cool:

PM sent

[STROKD]

Psssssst.............look at the new part of my sig at the bottom! :cool:
You didnt break my tranny, it has 30K miles on it, mostly racing miles at much over its rating, so I am happy it still is in one piece, and has all the gears left in it. Even if they don't shift :)

I blew up my factory T5 with only 320 RW... :o

[Big Thumper]

Strokd,

My Tremec wouldn't shift either. We tore it apart and the teeth on 2nd and 3rd gears were rounded off with small chunks missing. I looked at rebuilding, it would cost around 350.00. I called Liberty. I sent 2-4 gears off to them. They face-plated them....it is essentially a pro-shifted gear, but last longer. You can look on their web-site for pics. It cost 550.00 to do this. That tranny shifts a million times better now. The shifter just jumps into gear now. This is one of the best mods I have done to my car. First and 5th still have synchros, so down shifting into first is not a problem. It does have a clunk when you shift gears, but it is WELL worth it.
Send me a pm if you want some more info.