WT install 2003 6indash in my 95 cobra.

[pbm.cc]

will the '03, 6 in dash cd player work with the stock harness of the 95?
and can i tap into the harness to connect a amp and a sub to the factory crap?

if so...what wires would be for the remote for the amps to turn on before it gets to the amp.

(color of wire for behind the radio to before the amps)

and the color of the wire from the rear left or right speakers
(from back of the radio to before the rear left or right amps)


also what are the amps ohms?
can i put 4ohm speakers or are the amps for 8 ohms?
if anyone knows anything about this it would really help me out
thnxs :D

[pbm.cc]

anyone?:confused:

[KJ94GT]

The wiring is totally different, plus your AC/Radio cage (the plastic trim) is for single DIN applications, not double DIN. It won't fit.

[zcs626]

will the '03, 6 in dash cd player work with the stock harness of the 95?
and can i tap into the harness to connect a amp and a sub to the factory crap?

if so...what wires would be for the remote for the amps to turn on before it gets to the amp.

(color of wire for behind the radio to before the amps)

and the color of the wire from the rear left or right speakers
(from back of the radio to before the rear left or right amps)


also what are the amps ohms?
can i put 4ohm speakers or are the amps for 8 ohms?
if anyone knows anything about this it would really help me out
thnxs :D

it would work possibly if you can find a 95 harness for your factory harness coming out the car. then you'd have to find a 03 reverse harness that would plug into the 03 radio or whatever you claim you're hooking up. i wouldnt bother to be honest, but the amp turn on wire is the blue/white stripe. or are you asking for the factory amp turn on color code?

spkr wire colors:
front left: white (+)
white/black (-)
front right: grey (+)
grey/black (-)
rear right: purple (+)
purple/black (-)
rear left: green (+)
green/black (-)

im not sure if thats what you were wanting, or if you wanted the FACTORY speaker wire color codes you didnt specify.

as for the amp(s) - the amps can run the speakers whether they are 4 or 8 ohms. normally most factory speakers are 8 ohms, so if you run all new 4 ohm speakers the amp is going to be pushing harder yet not necisarrily (spelling?) making them sound as nice as they should. also it normally will cause that amp to run hotter than usual and has potential to fry quicker.

good luck