Moncused Again.

[302_plus_a_few]

I guess the LS1 types don't like me. The yellow Vette and the Black T/A Moncused me. 76 mile round trip and they don't show? :confused: I invited David Z28 out as well and he didn't show either. LOL! No surprise there.

My exhaust came off of my down pipe in the quick 8 finals and I picked up some serious MPH. Looks like I'm going to fab up a cut out for next time. I got runner up in quick 8. :D

This is last time I go to Spindale for a while. To far and getting out of that place after close is hellish! So if either of you boys want to race me it will have to be at Denton on a Saturday night. Preferably on a KOTH night when the track is hookin.

Originally posted by Sam88Gta2
You went a 6.6X to his 6.8X...the car is still stockinteral.Try and make it out Sunday so you can run him again. Well, where was he?Originally posted by z0sense
Can't wait to go to the track:) I love going, it is like everytime it gets faster:)I was there. Where were you?

[SNEAKY]

it can not be.


are you sure you went to the right track.

[302_plus_a_few]

Originally posted by SNEAKY
it can not be.


are you sure you went to the right track. Well, I'm old and all but since everyone else that said they would be there were there, I think I was at the right track.

[SNEAKY]

Originally posted by 302_plus_a_few
Well, I'm old and all but since everyone else that said they would be there were there, I think I was at the right track.


they must have been abducted by aliens.

[turbostang]

No yellow vette - I just dont believe that happened?

"insert bock bock here too"

[AL P]

Originally posted by 302_plus_a_few
My exhaust came off of my down pipe in the quick 8 finals and I picked up some serious MPH. Looks like I'm going to fab up a cut out for next time. I got runner up in quick 8. :D


A single 3" isn't enough for that setup, it's holding you back.

[93LXHORSE]

I think I saw a yellow Vette parked outside the gates..... looked like he was scared to come in?

I dunno.....

Congrats on runner up in the 8 though !

[302_plus_a_few]

Originally posted by AL P
A single 3" isn't enough for that setup, it's holding you back. The single 3" seemed to help when I put it on. All I have is an itty bitty 63-1 afterall. I'll put a cut out on it. That should help out with the back pressure.

<EMBED src="http://www.digital-sledgehammer.com/superchicken/sounds/sc_charge.wav" Autostart=TRUE Width=328 Height=32 Loop=False Hidden=true>

[Da Prez]

that blows...

[302_plus_a_few]

Let the excuses fly. I'm all out of give a shit tonight..... http://instagiber.net/smiliesdotcom/contrib/tweetz/moon.gif

[Beenfetchedlately]

It dont matter anyways....You didnt have enough to cover him and his et by .2 even on a sunday. ;)

When I called him he had forgot about the race and was at the grocery store getting things for something. It wont matter much to him that he didnt go since there was no money involved. We all know that Crawfish doesnt run for money :)

Mike

[JamesB]

typical ls1 guys :rolleyes:

[Andrew]

Originally posted by Beenfetchedlately
It dont matter anyways....You didnt have enough to cover him and his et by .2 even on a sunday. ;)


A little tweak of the boost controller to get the boost back up to where he would normally run and he'd be able to cover darren. Think he was showing all his cards?

[PooterWS6]

damn looks like they got some explanin to do.

[JamesB]

" I had to go to the grocery store" :rolleyes:

who needs to eat anyway? They have good corney dogs at the dale.

[93LXHORSE]

Frito Pies, too !

[Drs2288]

any one se that chick in that blue mach1, she was kicking ass, i want a DFWSTANG STICKER!!!, where can i get one at??

[Beenfetchedlately]

Originally posted by Andrew
A little tweak of the boost controller to get the boost back up to where he would normally run and he'd be able to cover darren. Think he was showing all his cards?

Does it even matter....Both parties can turn it up...But stock mustang blocks will only hold so much. Darren on the other hand has everything ready to take it up another notch and beyond what kirk can do.

Mike

has Kirk more than covered too but Kirk dont run for money :(

[Beenfetchedlately]

Originally posted by JamesB
typical ls1 guys :rolleyes:

Tell JC all about it! maybe you canhelp him fix it and he can pray for you too.

Mike;)

[z0sense]

Man to be honest I did completely forget. Mike did call me around 5 to remind me, and I was at the grocery store:(

I normally do go 4 times a week. I just completely did not remember our race.

To make it up to you though I will come out to Denton on a day of your choice:) Sorry you had to make that trip. There is no reason why I would not run you....especially since I have put down a faster time:p

When is Denton open? Is it open during the week anytime for test and tune? I am going to HRP on Friday this week if you want to caravan:)

So I should be back on Saturday if you can only run on the weekends. (Given that we can't find a time during the week).

Since I fell through on my end, I will let you pick the track:)

[Hawse771]

Originally posted by z0sense
Man to be honest I did completely forget. Mike did call me around 5 to remind me, and I was at the grocery store:(

I normally do go 4 times a week. I just completely did not remember our race.

To make it up to you though I will come out to Denton on a day of your choice:) Sorry you had to make that trip. There is no reason why I would not run you....especially since I have put down a faster time:p

When is Denton open? Is it open during the week anytime for test and tune? I am going to HRP on Friday this week if you want to caravan:)

So I should be back on Saturday if you can only run on the weekends. (Given that we can't find a time during the week).

Since I fell through on my end, I will let you pick the track:)

denton does test and tunes on thursday..you guys should do it this thursday..ill be makin my first trip to the track and it would be nice to see a good race!

[302_plus_a_few]

Originally posted by z0sense
Since I fell through on my end, I will let you pick the track:) I'm down for a couple of weeks while I fix the exhaust and couple of other things. I'll pick a KOTH or TTT5 Saturday night at Denton and let you and BeenFelchedLately know. I'll make sure and ask Mikey to call you every hour starting a couple of days before we race.

[Boss Hogg]

Originally posted by 302_plus_a_few
I invited David Z28 out as well and he didn't show either. LOL!
Now you'll race me. :rolleyes:

[AL P]

Originally posted by 302_plus_a_few
The single 3" seemed to help when I put it on. All I have is an itty bitty 63-1 afterall. I'll put a cut out on it. That should help out with the back pressure.

<EMBED src="http://www.digital-sledgehammer.com/superchicken/sounds/sc_charge.wav" Autostart=TRUE Width=328 Height=32 Loop=False Hidden=true>

You went from a stock H-pipe though didn't you!?? Of course it helped.

You need to make you up some 3" duals.

[302_plus_a_few]

Originally posted by AL P
You went from a stock H-pipe though didn't you!??Nah.. 2.5" Mac O/R pipe to 3" mufflers and out 2.5" Mac tail pipes.You need to make you up some 3" duals. Ouch! I'd have to come up with some oval tubing to do that!!!

[Big Thumper]

Originally posted by 302_plus_a_few
Nah.. 2.5" Mac O/R pipe to 3" mufflers and out 2.5" Mac tail pipes.Ouch! I'd have to come up with some oval tubing to do that!!!


YOu can make it work. I'm running 3" on HOS and it has awesome ground clearance. You can't even see it from the side. The headers stick down more than anything else.

[SEB]

The chicked noises is funny as hell!

[302_plus_a_few]

Originally posted by Big Thumper
YOu can make it work. I'm running 3" on HOS and it has awesome ground clearance. You can't even see it from the side. The headers stick down more than anything else. Well, my issue is that I'd have to crossover underneath a deep dish transmission pan. That's where I would run into problems with 3". The 2.5" stuff hangs down low enough for that very reason.

[Boss Hogg]

Just put a dump on it and save yourself the weight, cost, and time of a bigger exhaust.

[302_plus_a_few]

Originally posted by David Z28
Just put a dump on it and save yourself the weight, cost, and time of a bigger exhaust. Mark it! May 17th 2004 at 1:47pm - I agree with you.

[AL P]

Originally posted by 302_plus_a_few
Well, my issue is that I'd have to crossover underneath a deep dish transmission pan. That's where I would run into problems with 3". The 2.5" stuff hangs down low enough for that very reason.

I see....better look into some of that fancy oval tubing!!

[JamesB]

DR. GAS makes some

[90GT50]

Originally posted by 93LXHORSE
Frito Pies, too !
and diaharrea!(had 2 frito pies)