Me likey!!!!!!!!!!

[Mach1Marauder]

COMING SOON TO A MACH1 NEAR YOU! :D :D :D :D

Front runners!
http://www.bogartracingwheels.com/rt-welded-front.jpg

Rears!
http://www.bogartracingwheels.com/rt-welded-rear.jpg

[musclestang89]

those will look sweet on your MACH, are you going to get them in 17's?

[Da Prez]

sweeet...

[STRONGNUFF]

Those are going to look great Bill, plus the less weight up front may give ya some more air :D

[STROKD]

Bill those are bad ass wheels... Those are the Welded R/Ts, I was going to go with the Bolted R/Ts, but everyone I talked to said that street driving on them would be a joke. I am not into the whole drive to the track and swap tires out crap, besides, I would have no room to put them in my car... "IF" you plan to drive to the track, the rears will probably be fine, but the fronts, be damn sure careful you don't hit any pot holes, or large dips/bumps in the road, or bye bye $250 bucks!:(

[Mach1Marauder]

I think I'm going 15's all around.
15X3 1/2 in the front and 15X10 in da rear with Hoosier racing tires all around.
I think it would look a bit funny running 17s in the front and 15s in the rear and no selection for a good 17 front runner in drag tire or street tire.
All I have to do to the rears for then to clear is to grind a bit on that square ass banjo fitting.
The front wheel will come with the proper space already WELDED on to the wheeel to clear my brakes and MAYBE I may have to drill out my rotors and put in longer studs.
For the time being these will be my strip only wheels due to the tire selection and maybe for the show.

[Mach1Marauder]

Originally posted by STROKD
"IF" you plan to drive to the track, the rears will probably be fine, but the fronts, be damn sure careful you don't hit any pot holes, or large dips/bumps in the road, or bye bye $250 bucks!:(

No more "DRIVIN'" to da strip! :D :D :D :D
http://www.dfwstangs.net/hosting/Mach1Marauder/dodgetow.jpg

[juiced86stang]

Originally posted by STROKD
Bill those are bad ass wheels... Those are the Welded R/Ts, I was going to go with the Bolted R/Ts, but everyone I talked to said that street driving on them would be a joke. I am not into the whole drive to the track and swap tires out crap, besides, I would have no room to put them in my car... "IF" you plan to drive to the track, the rears will probably be fine, but the fronts, be damn sure careful you don't hit any pot holes, or large dips/bumps in the road, or bye bye $250 bucks!:(

That's the reason I got rid of my D-10's.

[musclestang89]

Originally posted by Mach1Marauder
I think I'm going 15's all around.
15X3 1/2 in the front and 15X10 in da rear with Hoosier racing tires all around.
I think it would look a bit funny running 17s in the front and 15s in the rear and no selection for a good 17 front runner in drag tire or street tire.
All I have to do to the rears for then to clear is to grind a bit on that square ass banjo fitting.
The front wheel will come with the proper space already WELDED on to the wheeel to clear my brakes and MAYBE I may have to drill out my rotors and put in longer studs.
For the time being these will be my strip only wheels due to the tire selection and maybe for the show.


thats cool. I was looking to switch wheels on my 89 and was thinking about going with pro stars. But I really like those and they would look pretty good on my car IMO. Just wondering how muchg do those run if you know? Are you going through Lane to get those?


Brandon

[Chuck]

looks pretty sweet. put some daylight under those front tires Bill :D

[Mach1Marauder]

Originally posted by musclestang89
thats cool. I was looking to switch wheels on my 89 and was thinking about going with pro stars. But I really like those and they would look pretty good on my car IMO. Just wondering how muchg do those run if you know? Are you going through Lane to get those?


Brandon

Yea Brandon
I'm working with Lane on these..........no firm prices yet........roughly $356 for the 15X10s and $242 for the 15X3 1/2s with custom spacer.......prolly a little less..........Bogart is REALLY proud of their stuff!:eek: :eek: :eek:

[musclestang89]

Originally posted by Mach1Marauder
Yea Brandon
I'm working with Lane on these..........no firm prices yet........roughly $356 for the 15X10s and $242 for the 15X3 1/2s with custom spacer.......prolly a little less..........Bogart is REALLY proud of their stuff!:eek: :eek: :eek:




thats $356 a wheel:eek: :confused: or both the rears :D

[STROKD]

Originally posted by musclestang89
thats $356 a wheel:eek: :confused: or both the rears :D Thats for one B...

I paid $335 for my backs and $225 for the fronts, so the prices are fairly close to my A-Stars... I was told that my A-Stars are way too soft to drive on the street as well, but MUCH more durable than the Bogarts... I haven't had a problem yet, but I only have about 200 miles on my skinnies, and about 400 on the 15x10s. So far no bends...:D

Brandon get the Bolted R/Ts... they look MUCH better...

[musclestang89]

WOW:eek: , I guess I won't be putting any wheels on the truck if I want these. Damn it looks like I better start saving alittle. ;) Also I could sell the draglites and get alittle money back, I also have a set of pro stars front runners on it now that I could sell :D

[STROKD]

Originally posted by musclestang89
WOW:eek: , I guess I won't be putting any wheels on the truck if I want these. Damn it looks like I better start saving alittle. ;) Also I could sell the draglites and get alittle money back, I also have a set of pro stars front runners on it now that I could sell :D You have five lug D/Ls? How much?;) I was thinking bout buying a set for the street, and keeping my A-Stars for track/show only...

[musclestang89]

yep its 5 lug. I have no idea how much I would sell them for. But first thing is first I would have to get some new wheels:D Heck it can be on jackstands for awile, we just about got it going. I need some wheels on it to take it to the track to tune it there.


But if I do decide to sell them I'll let you know.;) You need to get your tranny fix and we need to run them, once my car is tuned. I sure hope this 8inch crank pulley can spin that belt fast enough to get me some nice lower times ;)

[STROKD]

Originally posted by musclestang89
yep its 5 lug. I have no idea how much I would sell them for. But first thing is first I would have to get some new wheels:D Heck it can be on jackstands for awile, we just about got it going. I need some wheels on it to take it to the track to tune it there.


But if I do decide to sell them I'll let you know.;) You need to get your tranny fix and we need to run them, once my car is tuned. I sure hope this 8inch crank pulley can spin that belt fast enough to get me some nice lower times ;) Sounds great, I am in no hurry, but I know how clean your car is, so I want to be first in line for those wheels...

I will be pulling the tranny out probably next weekend, I have to get my dad's motor out of his car and send the chassis to the body shop for paint, once it is gone, I will have the entire garage to myself to pull the tranny, and fix it.:) I think it has some 6.60s in it on the good gas, so we should be pretty close.:D

[musclestang89]

Originally posted by STROKD
Sounds great, I am in no hurry, but I know how clean your car is, so I want to be first in line for those wheels...

I will be pulling the tranny out probably next weekend, I have to get my dad's motor out of his car and send the chassis to the body shop for paint, once it is gone, I will have the entire garage to myself to pull the tranny, and fix it.:) I think it has some 6.60s in it on the good gas, so we should be pretty close.:D

thanks man, and I'll let you know when I do decide to switch wheels


well I'm only shooting for 6.7's, any faster thats just a bonus. If I said I was shooting for a lower e.t and didn't get I wouldn't be happy. But I think I can hit my goals with the new mods that were done and never know maybe even faster. But like I said thats just a bonus

[Jerry]

Bill, don't be surprised if you see my 03' Cobra on those same wheels soon, I've been shopping them for a 2 days. Check out this 03' on Bolted R/Ts.. big $$

[musclestang89]

Originally posted by Jerry
Bill, don't be surprised if you see my 03' Cobra on those same wheels soon, I've been shopping them for a 2 days. Check out this 03' on Bolted R/Ts.. big $$


DAMN :eek: thats looks sweet as hell. Yep I think I'm going to have to get them now for my fox.:D

[Mach1Marauder]

Originally posted by Jerry
Bill, don't be surprised if you see my 03' Cobra on those same wheels soon, I've been shopping them for a 2 days. Check out this 03' on Bolted R/Ts.. big $$

OH YEA!!!!!!!
That looks sweet!!!
Damn! If my front drops that much, I'll have to get longer ramps or take off my chin spoiler.
That will look totally bitchin' on my MACH!!!!
Lane better hurry his but up.
Jerry have you called Lane's Wholesale in irving?

[Jerry]

Nope, haven't called Lane, he's next on the list. Those wheels would look sick on any Mustang :) Bogart is SUPPOSED to come out with a "Street" wheel in the P1 series but so far it hasn't worked yet, they can't find a barrel that they like. When they do come out with the "Street" P1 series, they will wiegh a few pounds more and cost about $30-45 less than the race version. I don't think I'm waiting for the street version since its vapor-ware today.

Jerry

[Mach1Marauder]

I like these RT welded series! If it drops me down too much, I'll just do somethin with 2x8s like this:

I already have a long dovetail on this trailer!

[pattymelt3605]

PM me for good deals on Bogart wheels.

[Lane]

http://www.dfwstangs.net/forums/attachment.php?s=&postid=1782973


:eek: :eek: :eek: :eek: :eek:

That's it! I'm getting them for the Scarecrow! They said they would make me a little deal for my own personal car. :D Not much though - lol

Got 'em ordered Bill - 2-3 weeks build time though... :(

[Hollywood]

Originally posted by Jerry
Bill, don't be surprised if you see my 03' Cobra on those same wheels soon, I've been shopping them for a 2 days. Check out this 03' on Bolted R/Ts.. big $$

That car is smokin!

[STROKD]

Originally posted by Jerry
Bill, don't be surprised if you see my 03' Cobra on those same wheels soon, I've been shopping them for a 2 days. Check out this 03' on Bolted R/Ts.. big $$ Damn that looks sick... I love those damn wheels... Look a lot like mine:D

I need some Hoosier front runners, it makes the package look so much cleaner...

[Undergroundking]

Those bitches are gonna look pimp on the mach Bill!

[Mach1Marauder]

Originally posted by Undergroundking
Those bitches are gonna look pimp on the mach Bill!

Yea, maybe so, but your Cobra still has a HUGE pimp factor itself!

[Tremor]

a buddy of mine here in lubbock has those exact same wheels on his mach. LOOK PIMP

[Jerry]

FYI: Got my Bogarts, not from anyone on here BTW, but from a shop that had a set on the shelf for an 03' Cobra.. mounted the tires and then found out 2 were out of round, and 1 had a small dent on the backside as if it had been dropped on the lip. The dent was insignificant from a performance standpoint. The out of round crap sucks though.. all 4 wheels have a spacer welded on the back and apparently thats not on square..??

Sent back to Ricky Bogart, will get their Thursday, we'll see what he says.

I wish Bogart made an XP front in 15x3.5!!

Jerry

[Mach1Marauder]

Originally posted by Jerry
FYI: Got my Bogarts, not from anyone on here BTW, but from a shop that had a set on the shelf for an 03' Cobra.. mounted the tires and then found out 2 were out of round, and 1 had a small dent on the backside as if it had been dropped on the lip. The dent was insignificant from a performance standpoint. The out of round crap sucks though.. all 4 wheels have a spacer welded on the back and apparently thats not on square..??

Sent back to Ricky Bogart, will get their Thursday, we'll see what he says.

I wish Bogart made an XP front in 15x3.5!!

Jerry

Well that really sucks Jerry! Thanks for the heads up! We will check before putting tires on.
I wonder with the spacers already welded, like mine will be, if these wheels are hub consentric(sp?) or line up by studs?

[Ktulu]

yuck

[Lane]

Originally posted by Mach1Marauder
Well that really sucks Jerry! Thanks for the heads up! We will check before putting tires on.
I wonder with the spacers already welded, like mine will be, if these wheels are hub consentric(sp?) or line up by studs?

I'm sure they're 'lug-centric' Bill. And we'll check the wheels before we mount the tires. :)

[Mach1Marauder]

Originally posted by Ktulu
yuck

Wassa matta Bullitt-Boy?

[Ktulu]

just never have liked tose type of rims :sruggs:

[FAZAZZ98COBRA]

how much are you getting the bogart runners for? just curious, i have been thinking about getting some too... well after, i put in my new motor:(

[Mach1Marauder]

Originally posted by FAZAZZ98COBRA
how much are you getting the bogart runners for? just curious, i have been thinking about getting some too... well after, i put in my new motor:(



Yea Brandon
I'm working with Lane on these..........no firm prices yet........roughly $356 ea. for the 15X10s and $242 ea. for the 15X3 1/2s with custom spacer.......prolly a little less..........Bogart is REALLY proud of their stuff!eek: :eek: :eek:

[FAZAZZ98COBRA]

:( same prices i have... i was hoping you found a better deal:D

[90GT50]

Originally posted by juiced86stang
That's the reason I got rid of my D-10's.
wuss. :p
I havent even put them on yet, heh.

[pattymelt3605]

PM me if you need a good price on a set of Bogarts.

Patrick