Wallbasher goes to the dyno...

[turbostang]

Well.. I cant keep the good news all to myself - so here it is..http://www.dfwstangs.net/hosting/turbostang/dyno_screenshot.jpg http://www.dfwstangs.net/hosting/turbostang/dyno_screenshot_2.jpg

the a/f on the first run is scattered all over due to the boost controller not working.. at all.. or should I say hooked up incorrectly....but it made power ... good power too..

the second run was a very very rich tune with only 10:1 throughout the whole run and 13 psi boost made 585 rwhp..

On the next run it pegged the MAF quickly and the A/F went to 17:1 - YIKES.

So now I have to put the 96's in and go for it... To be continued.

Oh.. also - Special thanks to all of the people who were there to help me out on the dyno day. True Street 5.8, HammuH, Mike Walker and Brice @ Alamo Autosports.....

[93LXHORSE]

Sweet ! 6.99s here you come !

[turbostang]

Originally posted by 93LXHORSE
Sweet ! 6.99s here you come !

That is all I want.. I figure with the 150 extra horsepower it should pick up a tenth or two..

[FlowJack]

damn....that's some nice power numbers!

[Bad89stang]

Good job Brooks! :eek:

[302_plus_a_few]

Originally posted by turbostang
That is all I want.. I figure with the 150 extra horsepower it should pick up a tenth or two.. That's about right. Turbo Mustangs only pick up 1/100 for each additional horsepower.

Make sure you have some 28x10 slicks!

[Monsoon X]

Great numbers Brooks! You guys make some serious power

[SALEEN449]

Nice numbers.....Brice is a great guy(Alamo)

[Boss Hogg]

Congrats! Sounds like you know what you're doing!

[trey85stang]

Congrats Brooks... 700 club far away?

[46fever]

good #'s ,but work on that air fuel:D

[SNEAKY]

congrats ballwasher

[46fever]

lol, it's ballsbasher to you trick!

[turbostang]

Originally posted by 46fever
lol, it's ballsbasher to you trick!


Thanks, You beat me to it. Billy is just a Jealous Trick ho!

[SNEAKY]

Originally posted by 46fever
lol, it's ballsbasher to you trick! :D

[Kris]

Good numbers!! Can't wait to see it run that 6.99.;) :D

[Monsoon X]

so when is that nice dyno slip gonna hit up Kennedale?

Will they even let you back in?

[turbostang]

Originally posted by Monsoon X
so when is that nice dyno slip gonna hit up Kennedale?

Will they even let you back in?

yeah.. they promised to get the water off of the track this time BEFORE I run....

I hope to go by the end of January. Dont worry I will slow down for ya..

[Monsoon X]

Originally posted by turbostang

Dont worry I will slow down for ya..

You know I'm not worried about you............Don't you? ;)

[turbostang]

Originally posted by Monsoon X
You know I'm not worried about you............Don't you? ;)

pffffffffffffffft.

[Monsoon X]

Originally posted by turbostang
insert sound of Denial

[turbostang]

Originally posted by Monsoon X



insert skunk pic getting drug

[302_plus_a_few]

Originally posted by turbostang
insert skunk pic getting drug

[98DSM]

Great #'s! Now just work on the A/F as i'm sure you know there is more power to be had. How much timing are you getting? Have you tried any b37 or c16 yet?

[BP]

Not bad! Btw: Speedtek hooked me up on my injectors pretty good and they are MSDs. Are you still using the tweecer?

[ozzeran]

how was bryce and tuning of the car if he did? i know he's mostly a dsm guy or used to, i used to hang out up there a lot when i had my turbo civic. nice numbers btw.

[turbostang]

Originally posted by 98DSM
Great #'s! Now just work on the A/F as i'm sure you know there is more power to be had. How much timing are you getting? Have you tried any b37 or c16 yet?

well believe it or not I did lean it out some already. It picked up 35 rwhp but obviously it is still rich as hell, but the problem is that it picked up enough power to peg the MAF so right now I am done till I get the new MAF....It did have race gas in it but it was not necessary ... just a precaution.

Not bad! Btw: Speedtek hooked me up on my injectors pretty good and they are MSDs. Are you still using the tweecer?

I am still using the Tweecer.. and I already have the injectors and the accelleronics low impedance driver. I just have to get the new MAF ordered. Then I will be able to add a little more boost to it..

how was bryce and tuning of the car if he did? i know he's mostly a dsm guy or used to, i used to hang out up there a lot when i had my turbo civic. nice numbers btw

He did NONE of the tuning.. He just helped out with the boost controller which I had hooked up incorrectly... Thanks for the props...
It has some left in it...;)

[ozzeran]

He did NONE of the tuning.. He just helped out with the boost controller which I had hooked up incorrectly... Thanks for the props...
It has some left in it...;) [/B][/QUOTE]


yeah kinda figured he didn't tune it, dunno why i asked, man i wish i would have know you were going up there, i'm 5 mins from there. :) Loved to have heard that.

[turbostang]

Originally posted by ozzeran
He did NONE of the tuning.. He just helped out with the boost controller which I had hooked up incorrectly... Thanks for the props...
It has some left in it...;)


yeah kinda figured he didn't tune it, dunno why i asked, man i wish i would have know you were going up there, i'm 5 mins from there. :) Loved to have heard that. [/B][/QUOTE]

hopefully I will be going back there soon.. When the new MAF gets here. :D

[SNEAKY]

good luck, ballwasher

[turbostang]

Originally posted by SNEAKY
good luck, ballwasher

Billy are you chearleading again?

[SNEAKY]

Originally posted by turbostang
Billy are you chearleading again?
can i get a "B"
can i get a "U"
can i get an "R"
can i get a "T"
whats that spell? Burt, Go Burt:D

[dragradialstang]

Originally posted by turbostang
pffffffffffffffft. Brooks you must not know that any LS1 with cam/ or heads cam will go low 6's on the bottle?

[Big Thumper]

Originally posted by dragradialstang
Brooks you must not know that any LS1 with cam/ or heads cam will go low 6's on the bottle?


Finally, someone with some sense around here...;)

[turbostang]

Originally posted by dragradialstang
Brooks you must not know that any LS1 with cam/ or heads cam will go low 6's on the bottle?

yeah.. you are right.. I should have known. silly me.

Billy - Go away - Please.

[93 Blk Coupe]

great numbers...might be enuf to get by the lil ole coupe...;)

[turbostang]

Originally posted by 93 Blk Coupe
great numbers...might be enuf to get by the lil ole coupe...;)


but wait there's more....;)

[SNEAKY]

Originally posted by turbostang
Billy - Go away - Please.
<~~~~~~~~~~turns and walks away with head down mumbling something about a piece of pipe packed with gun powder

[turbostang]

Originally posted by SNEAKY
<~~~~~~~~~~turns and walks away with head down mumbling something about a piece of pipe packed with gun powder


blah blah blah.. I am still faster than you.

[SNEAKY]

Originally posted by turbostang
blah blah blah.. I am still faster than you. live it up while you can balllicker, i mean ballwasher, i mean wallbasher.

[dragradialstang]

When is the ballwasher going to the track?

[turbostang]

Originally posted by dragradialstang
When is the ballwasher going to the track?


ballwasher? You have me confused with your twin Billy.... I just ordered my new MAF today - So it may not be here till next week or so.. in the meantime I am going to the salvage yard this week or weekend to get the necessary body panels.. after it is reassembled I will take it to get the front end setup.. and then the track it is.. oh yeah.. I need one more dyno session too.

[dragradialstang]

Originally posted by turbostang
ballwasher? You have me confused with your twin Billy.... I just ordered my new MAF today - So it may not be here till next week or so.. in the meantime I am going to the salvage yard this week or weekend to get the necessary body panels.. after it is reassembled I will take it to get the front end setup.. and then the track it is.. oh yeah.. I need one more dyno session too. Sorry must have sliped on the keyboard!

[turbostang]

Originally posted by dragradialstang
Sorry must have sliped on the keyboard!


So what were you doing standing on it?:confused:

[SNEAKY]

so, have you driven it around yet?

[dragradialstang]

Originally posted by turbostang
So what were you doing standing on it?:confused: I type with my feet!

[turbostang]

Originally posted by SNEAKY
so, have you driven it around yet?

No. Not yet. I have to get the body work completed. Hopefully this weekend.. maybe the first part of the week.

[SNEAKY]

well. hurry up right turn clyde.