PDA

View Full Version : Got my problem fixed!

Hit Man X
10-04-2001, 10:35 PM
After I called PPI, much better now with new people-kick ass PPI, and talked to their new tech guy I have it all figured out.
My A404 has a max input of 2.5v so running it with 4v input overdrives the amp so less gain is needed. My gain was up a bit too high, so I turned it down and SUPRISE all problems are gone!
Ah, all is well.
Slow90Vert
10-08-2001, 01:57 AM
Hmmmm, I will have to take note of that. Thats really wierd, first I have ever heard of it. So does it sound bad ass now?:D
Hit Man X
10-11-2001, 09:31 PM
Yes it kicks ass now. You can go deaf with the windows down haulin' ass down the highway! :)

The input was is quite high, gain up too much, and the front channels are down to a 2ohm load. It was just a bit too much for the amp made when 4v preouts were unheard of! :D
breadfan35
10-12-2001, 08:18 PM
Good for you.
outatime
10-12-2001, 09:26 PM
ppi? is that the mustang guys ?
jbullerjr
10-14-2001, 10:11 AM
PPI = Precision Power Industries

They make amplifiers , subwoofers, rca's, wire etc...

James