Tranny install help - DFWstangs Forums
 
LinkBack Thread Tools Display Modes
post #1 of 1 (permalink) Old 04-14-2012, 02:57 PM Thread Starter
Punk Ass Newbie
 
Join Date: Dec 2005
Location: Burleson
Posts: 14
Tranny install help

Need some help from my fellow Mustangers,
I have a '93 coupe with a T5. A while back I had a trans problem that caused the front u-joint to break and the driveshaft to fall out of the car. I found that the mainshaft was about 15 degrees out of round and not sure if this was a cause of the u-joint breaking or an effect. The tail shaft and the bellhousing were broken also. Had all that replaced and put the transmission back in. I am using the same centerforce dual friction clutch and pressures plate but replaced the clutch cable. the problem is that the clutch will not disengage when the pedal is all the way to the floor. When I went to start the car it lurched forward, again with the clutch pressed down all the way. I have an adjustable cable and no matter how far I adjust it, the clutch still will not disengage. The clutchfork is on the ball stud and from what I can see the Throw out bearing is on the clutchfork correctly and moes forward and back with the clutch fork. I'm not sure where to go from here so would someone let me know what to check before I go through the trouble of pulling the tranny AGAIN. This is a major pain in the ass because I am working in my driveway on jackstands.

Tazman
Tazman683 is offline  
Sponsored Links
Advertisement
 
Reply

Bookmarks

Quick Reply
Message:
Options

Register Now



In order to be able to post messages on the DFWstangs Forums forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.

User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.

Password:


Confirm Password:
Email Address
Please enter a valid email address for yourself.

Email Address:
OR

Log-in









Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page
Display Modes
Linear Mode Linear Mode



Posting Rules  
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is On
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome